Rate this post by selecting a number. 1 is the worst and 5 is the best.
Author
Message
Kevin Trac TryHard 2141.sydney.nsw JZZ30MT, JZZ31AT
Posts: 358 Reg: 10-2006
Rating: N/A Votes: 0
Friday, November 20, 2009 - 05:06 pm, by: Kevin Trac(Menty)
I tried removing the Rear upper control arms to install new bushings today, but failed.
The bolts on the UCA would not come out. Normally the bolt would be welded on one side so that the bolt can come out, but it seems this isnt the case in our cars.
I need a good (Re: reasonably priced) shop who is able to do this task for me. Recommendations are welcomed.