Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Lew Radbourn
Goo Roo
Queensland
jzz30 ute / uzz30/ 2 X uzz31

Posts: 1148
Reg: 07-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Monday, August 14, 2006 - 01:15 pm, by:  Lew Radbourn (Marlew)

Dom;
Mate just make sure the fuel level is below were the opening to the tank is.
and don't smoke mate .hehehehehehe
you should find a bracket that the old pump is located on IF the new pump doesn't fit exactly in were the old one came off you will have to hose clamp it in place.
IF you have to hose clamp it in place then there is a sock available to put around the pump and under the clamp that is resistant to petrol and will stop any buzzing noise from the pump that WILL drive you mad in the cab .
i did mine the first time and never had the sock and i thought all hell was breaking loose in the car.
and more so when the fuel level dropped around 1/4 tank .
MATE the stereo couldn't go that loud to drown out the noise

  Administration Administration      Log Out Log Out