Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Ben Lipman
Goo Roo
NSW
Soarer TT manual

Posts: 1017
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Sunday, November 09, 2008 - 06:36 pm, by:  Ben Lipman (Ben12a)

Finished the door trim and relocating all the switchgear from the door.
Upload

Upload


Also swapped the adjustable sway bars from the road car to the track car. Whilst I was under there I had a good look at the mystery front coilovers. It turns out they are "Kei office" items, and the lower mounting bushes are flogged out. I am checking into the whether or not these can be rebushed, or just biting the expensive bullet and buying a pair of HSD HRs to match the rears. The little info I found on the net suggests the Kei office are a good thing, and they are usually pretty stiffly sprung so they should suit the car. There is a pic below of what they look like- if you know anything about them I'm happy to hear it.
Upload

  Administration Administration      Log Out Log Out