Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Dave Cazes
TryHard
sa
tt

Posts: 251
Reg: 08-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Wednesday, November 12, 2008 - 11:57 am, by:  Dave Cazes (Cazman)

If you want a matching set of HSDs then buy some,
If you are after some bilstein coilvers I would reccommend them for sure.

Of if your KEI office are an insert style then I would suggest thinking about putting a bilstein insert into them. 100% safe and a common practice

Youd be looking at about $600 pr or so, but I would need measurments of your KEI office shocks, and whether they are actaully insert style etc.

Or for custom stand alone bilsteins:
Your looking at about.... well depending on who you buy the gear from.... Its cheaper to buy the coils and sleeves from the US actually, even with our crap exchange rate.
say $400-500 for a pair of shocks
$100-250 for a coilover sleeve kit (pair)
$200-300 for springs in any rate you need (pair)

optional revalve of shocks is about $250 the pair

these wil out perform any coilvoer you put in with the exception of some arragostas or Ohlins which topple into the 4k mark

As I mentioned you CWG height will pay the biggest role in your damper and spring choice selection. Unless you can fabricate and weld well you have to run your car fairly high in reality.
If any one wants to argue I will get out the pics.

  Administration Administration      Log Out Log Out