Rate this post by selecting a number. 1 is the worst and 5 is the best.
Author
Message
Ben Lipman Goo Roo NT Soarer TT manual, plus TT track car
Posts: 2004 Reg: 04-2006
Rating: N/A Votes: 0
Monday, March 08, 2010 - 10:36 pm, by: Ben Lipman(Ben12a)
Andrew McKellar wrote on Monday, March 08, 2010 - 08:57 pm:
The only problem with your front spoiler is how high it is from the ground
agreed. At the moment it is as low as it can go and still get on and off the trailer. I am toying with the idea of extending it forward another 50mm and say 20mm lower by way of a removable extension that would curve back into the undertray to form a wing profile and thus local low pressure area around the front axle area. I read in the CAMS book somewhere about a minimum radius for projections. I think it is 15 or 20mm, so this would address that if it is an issue also.
I have also seen guys run an air dam, with a splitter under it and then another sacrificial air dam under the splitter to further keep air out from under the car. Looks weird though.
