Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Ben Lipman
Goo Roo
SA
Soarer TT manual, plus TT track car

Posts: 2533
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Wednesday, December 29, 2010 - 09:43 pm, by:  Ben Lipman (Ben12a)

So I finished replacing the upper and lower control arms and bushes. I can say this job has not got any more fun. New bushes went in using a bench vice and some pieces of wood with no problems.

Had the usual fun getting the ball joints undone. That ball joint separator has well and truly paid for itself. Did a quick and dirty alignment before tightening the bushes up. With all the adjustments zeroed (set to center) it came out with 1.25 deg neg camber, and the toe is a little off to the right. I'll sort it all tomorrow or whenever I get the ride height of the track car back down to something more useful.

  Administration Administration      Log Out Log Out