Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Ben Lipman
Goo Roo
SA
Soarer TT manual, plus TT track car

Posts: 2683
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Saturday, March 12, 2011 - 01:51 pm, by:  Ben Lipman (Ben12a)

Well,

I have to say I am disappointed with the Ikeya arms. I was a bit worried when I laid them down side by side last night as they seemed to be the same length when the Ikeya was adjusted to it's shortest length. My suspicions were confirmed when I went to do an alignment this morning. I am able to get another half a degree of adjustment from these highly regarded arms. So I have 2.5deg neg camber on the passenger side, and 2 degree neg on the drivers side.

I am now committed to improving this, by hook or by crook. I am going to do what an old racer recommended a year or so ago. I am going to widen the slot the eccentric bushes slide in to by a millimeter or so on the outboard side to see if I can gain some adjustment. I plan to start on the drivers side with the aim of at least getting the adjustment equal at 2.5 degrees.

Should this fail to satisfy me, I am going to do the same to the Ikeya arms and try to gain another millimetre or so of adjustment.

Wish me luck. To the Dremel, Batman!

  Administration Administration      Log Out Log Out