Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Ben Lipman
Goo Roo
SA
Soarer TT manual, plus TT track car

Posts: 3197
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Sunday, April 29, 2012 - 07:11 pm, by:  Ben Lipman (Ben12a)

Aaron, there is nothing sort of anywhere near the end of the undertray/diffusers. The closest thing is the sway bar. The front crossmember/subframe is about 15-20cm to the rear of the diffuser. I am thinking I may need to weld some square tube to the subframe so the diffuser engages the tube somehow and is then supported. The trick is it has to be dead simple and it must 'slide' together without any help as when the car is on the ground you cannot get under there.

The other idea is bolt some ally hooks to the lower radiator supports to catch the diffuser and retain it.

I still have never figured out the brake ducting, so there might be something there I can do to incorporate some supports.

  Administration Administration      Log Out Log Out