Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Ben Lipman
Goo Roo
SA
Soarer TT manual, plus TT track car, plus a spare shell

Posts: 3635
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Saturday, January 18, 2014 - 05:14 pm, by:  Ben Lipman (Ben12a)

Cheers Michael. We are still pursuing it.

Got the car off the trailer and into the garage today. Warmed the engine up and did a leak down test on all cylinders. The results were a little surprising, so I redid the compression test with the motor warm.

I was hoping to find a smoking gun. I did not. I am now more confused as to what the noise is. Basically all cylinders have 20% leakage, which is at the low end of the 'good' scale. All cylinders have 150 psi (hot) except number 6 which has 130 psi. So compression is still low in number 6, but the leak down test doesn't show a leak.

Is it possible that there is a leak via the valve before the cylinder hits TDC? Like it is a bit sticky and the compression helps close and seal the valve?


Cylinder123456
% leak down102020202020
Comp psi155150150155150130

  Administration Administration      Log Out Log Out