Rate this post by selecting a number. 1 is the worst and 5 is the best.
Author
Message
Ben Lipman Goo Roo SA Soarer TT manual, plus TT track car, plus a spare shell
Posts: 3942 Reg: 04-2006
Rating: N/A Votes: 0
Wednesday, July 01, 2015 - 08:17 pm, by: Ben Lipman(Ben12a)
I am entered in the RENEW Rotary Nationals on Sunday 12 July. Reading the regulations, I discovered I need a 5/6 point harness. I managed to find one for a good price (someone else's error is my gain) and it arrived this morning.
I welded in two new mounts under the seat, and after several attempts to get the crutch strap length correct bolted everything back in.
In other news my Kevlar finally arrived and I got the undertray constructed. This time I used 10mm polyurethane foam laminated in the Kevlar and 'glass to make the splitter. I reckon next time I will buy 15mm foam as the 10mm makes for a much thinner splitter. Seems strong enough though. To put that in perspective: the fibreglass splitter is 40mm thick and was filled by hardware shop 'space invader' style PU foam from a can. This means the ride height of the front splitter is now 25mm higher. I'll find out how this goes next week.
