Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Mark Paddick
Goo Roo
ACT
Soarer UZZ31

Posts: 644
Reg: 07-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Thursday, September 29, 2005 - 09:07 pm, by:  Mark Paddick (Sparks)

Cut the NSS wire (pin 3 small plug) so that there is enough length still connected to the small plug to run it to pin 25 of the large plug.
Cut the black park brake wire (pin 5 small plug) leaving enough wire on the small plug to run it to pin 13 of the large plug.
Cut the speed wire (pink pin 13 small plug) and leave it cut.

So in the end pin 3 of the small plug connects to pin 25 of the large plug....and pin 5 small plug goes to pin 13 large plug. Pin 13 of the small plug goes nowhere. The original connections to pins 3,5 and 13 of the small plug are no longer connected.

  Administration Administration      Log Out Log Out