Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Elizabeth Hogan
TryHard
western australia
V8 Limited edition

Posts: 142
Reg: 02-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Tuesday, August 28, 2007 - 10:48 pm, by:  Elizabeth Hogan (Snowcatz)

OK Guys,Lights are in and tested them tonight.
Some comments received regarding the lights are warranted BUT.
Honestly speaking, The light i have had fitted are universal, no need to extend any wiring.

The lights where fitted with H1 globes which put of the same amount of light as the commodore.( tested at workshop).
Can also be fitted with HID.

These light ARE justable. When first put in they hit the roof but once adjusted they where fine.

The fog lights have been disconnected and connected to a switch so they are not on all the time.
The fog light are blue in colour and are illegal here in perth if used incorrectly.

As for the gap that was spoken about, yes there is a slight gap around the light that i have marked in one of the photos.Bottom.
Reason this is, the rubber around the original lights are thicker, so all that needs to be done to eliminate the gap is to install a thicker rubber around the lights.

I will be doing this when i get the new kit installed.

Tested the car tonight, Drove up and down brand highway where there is no street lights , pitch black and not one driver flashed at me, but one of the lights are sitting a smidgen to the right and will be going back in to correct this.

Overall, there is no real problem with these lights, they look fab and will look even better when i install the glass high beam and clear indicators.Well worth the money.

Liz

Upload

Upload

  Administration Administration      Log Out Log Out