Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Mark Tierney
TryHard
NSW
Soarer GTT, Celsior, Ducati

Posts: 284
Reg: 09-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Friday, September 04, 2009 - 06:11 pm, by:  Mark Tierney (Mark_t)

OK they are in. Only took about 1/2 hour max to fit everything & I've never pulled the console or shifter off before. Shifter is a piece of piss, maybe 30 seconds to get off.
Tutorial on how to listed here from Peter:
"Soarer Central/How-to and Tutorials/Removing the Head Unit"
The handbrake has 4 bolts (2x16mm & 2x8mm) & a philips head screw. Undo the screw to release the handbrake microswitch that is linked to the handbrake icon on the dash. two other small nuts attach the cable.
BTW, the tension on the cable can actually be adjusted from here & uber easy...no need to take a wheel off
Anyways, this was about the easiest thing I have ever done on the Soarer & they look a million bucks. Whattaya think?


Upload

Upload

Upload

Upload

  Administration Administration      Log Out Log Out