Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Michael McKellar
Tinkerer
Overijssel
Mini

Posts: 47
Reg: 08-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Thursday, August 19, 2010 - 02:37 am, by:  Michael McKellar (Mickmini)

Hi all

I am trying to put together the information needed to have the Z30 series included in Group 3J for improved production racing.

One of the tasks is to have the standard interior measured. I don't have access to a Soarer with a standard interior, so I am looking for volunteers to measure the following:

Vehicle Measurements

The dimensions to be checked (in cm) are:

B. Height over the front seats (measured between 0° and 15° towards the rear in relation to the vertical).

C. Width for the front seats.

D. Height over the rear seats (measured under the same conditions as B).

E. Width of the rear seats.

F. Distance from the centre of the hub of the steering wheel to the brake pedal (if the steering wheel is adjustable it must be placed in the median position).

G. Length from the centre of the hub of the steering wheel to the bulkhead of the rear seat, or if possible to the rear face of the rear seat (maximum tilt 15°). If the steering wheel is adjustable, it must be placed in the median position.

B and D are measured between the bottom of the seat and the ceiling (padding compressed).

If the seats are separate, the measurement is taken in the middle of each of the seats.

In case of longitudinally adjustable seats, the seats will be placed in the median position.


C and E are the maximum widths measured along the vertical plane passing through the axis of seats, being able to be freely maintained over a height of at least 25 cm and a length of at least 40 cm.

The minimum dimensions (in cm) according to the cylinder capacity (in cc) are the following, with H = F+G:


RegulationBCDEFGH
Over 2000cc9312093120N/AN/A210


This VehicleBCDEH
Soarer


The main one I need confirmation on is D, but I would like all the dimensions.

Can someone please help?

Cheers
michael

  Administration Administration      Log Out Log Out