Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Cameron James
Soarer GT-TL

Posts: 23
Reg: 09-2009

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Tuesday, December 22, 2009 - 12:38 pm, by:  Cameron James (Dinosoarer)

Machined the spring cap down today


With a straightedge across the sealing surface, the machined groove had a clearance of 0.63mm - this has not been reduced to 0.34mm - with almost 1/2 the clearance removed the diagpram should clamp up a fair bit tighter between the housings and hopefully stop the leak....

  Administration Administration      Log Out Log Out