Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Aaron Mead
Goo Roo
NT
Celsior 1UZ-FE Mines, JZZ30 1.5JZ-GTE To4z

Posts: 2511
Reg: 03-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0

Friday, October 16, 2009 - 07:50 pm, by:  Aaron Mead (Aaron)

I'm dyin man! Did it today, but not in time for a wheel alignment. Did tie rods, lower ball joints, lower control arm bushes (took an hour to get them pressed out, then cleaned up, the greased and new ones pushed back in, it's a killer to get the outer shell. Of the bush out without a big
enough socket to use as a pin. Ended up
hacsawing the outer shells out. Did upper control arms, piece of piss hardest thing was getting those air lines back into the struts. That's after
pants taking them off. Advice: wait for
the hissing to stop. Saves on dry cleaning.

Went for a spin just now .......... Like a new front end :-)

  Administration Administration      Log Out Log Out