Sunday, July 11, 2010 - 10:47 am, by: Ben Rowe(Blinga)
I've had issues like that. Need a boot of gas to get it to fire over. The bearings in the idle bypass valves were seized in the normal idle position. Where as cold start the valve opens that fraction more for higher idle say round 1k.. Pull the unit apart and press off the old bearings replace with new. The bearings only cost about $3.50 each. Just take em into a bearing shop they are a common size. When you re install the idle bypass make sure its fully open. use plenty of anti seize on it and it should work a treat. Cheaper than sourcing another unit. Easy fix to do.
