Rate this post by selecting a number. 1 is the worst and 5 is the best.
Author
Message
Steve Morris Tinkerer vic 2.0L TWING TURBO L- GZ20
Posts: 47 Reg: 10-2005
Rating: N/A Votes: 0
Tuesday, February 06, 2007 - 08:45 am, by: Steve Morris(Purple5ive)
Yes you need the clutch pedal, and brake pedal from one of the supras I got mine from a ma70 non turbo u will also need the clutch master and slave cylinder to go with it
The best way to do it is find a ma70 non turbo Get the w58 gearbox out of it including the gearbox cross member Get the clutch master and slave cylinders out of it including the lines Get the clutch pedal and brake pedal out of it
you will need to find/purchase/fabricate a 1g-gte manual flywheel ( good luck ) also make sure you have the right generation flywheel as there’s differences in them a 1g-gte to w58 (manual) bell housing (good luck to that too) a 1g-gte clutch kit (daikin make a good one which is what I had and it wasn’t too heavy on the foot) a soarer centre gearbox shifter console (or u can modify the auto one like I did ) a custom tails shaft ( or use the existing one you have and modify it ) the tail shaft needs to be lengthened or shortened im not sure which one it is to make it fit the manual gearbox
and when its all done you have to do something to the parking switch I cant remember what it is ask on toymods they will help you out there also the reverse lights need to be connected to the new box as well