Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help
  Soarer Central * Track and Major Rebuild Car Projects * Ben's Time Attack Soarer * Archive through June 15, 2010 Previous Previous    Next Next  

Author Message
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2166
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, May 24, 2010 - 10:30 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Nice Paul. Got any more?

It sure looks like it Aiden.
Rob Rojo
Goo Roo
NSW
Soarer TT

Posts: 4039
Reg: 02-2010

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, May 24, 2010 - 10:34 pm, by:  Rob Rojo (Rob_tt) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

You had it all over him around the corners but that thing is quick in a straight line.
You would have got him if you wound the boost up, even just on the straights.
Aiden Cheese
TryHard
QLD
Soarer jzz30

Posts: 397
Reg: 09-2009

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, May 24, 2010 - 10:57 pm, by:  Aiden Cheese (Chillpen) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)


Rob Rojo wrote on Monday, May 24, 2010 - 10:34 pm:

You had it all over him around the corners but •••• that thing is quick in a straight line.


thats what i was thinking so i googled and came up to his first post on ls1 forums which included a link to his photobucket. He was pretty respectful and nice in his posts so i can't really hold any grudges for his character.

I couldn't figure out his actual modifications (if any) for the car without spending *some* time looking so i gave up :-)

Oh i know he's changed his suspension (both from looking at it and) because he's got a pic on the pedders site.
Rob Rojo
Goo Roo
NSW
Soarer Single Turbo Manual

Posts: 4042
Reg: 02-2010

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, May 24, 2010 - 11:29 pm, by:  Rob Rojo (Rob_tt) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

http://www.ls1.com.au/forum/showthread.php?t=129048
Aiden Cheese
TryHard
QLD
Soarer jzz30

Posts: 403
Reg: 09-2009

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 12:11 am, by:  Aiden Cheese (Chillpen) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)


Rob Rojo wrote on Monday, May 24, 2010 - 11:29 pm:

http://www.ls1.com.au/forum/showthread.php?t=129048



groboz wrote on some time in the past, last year, x:


0 -100 km/h (96.5 actually) = 5.21 seconds

80 - 120 km/h = 3.7 seconds

Results were consistent 1.27s with a new PB lap time of 1.27.2453.




To be fair after reading 8 pages he seemed like a pretty alright bloke for a commy driver haha. He takes advice well, respectful and sounds like he's doing it for fun. Can't really be too angry at a guy who's enjoying what he does for fun.

Edit: plus i give him respect for posting this openly on a forum
http://s669.photobucket.com/albums/vv52/groboz/?action=view&current=Ohshit.flv
with the subtitle "Ran out of talent"

haha
Paul Kalie
Tinkerer
NSW
TT

Posts: 36
Reg: 02-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 10:41 am, by:  Paul Kalie (Ajzs) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

more
http://i261.photobucket.com/albums/ii43/rentarspics/DSC01468.jpg

http://i261.photobucket.com/albums/ii43/rentarspics/DSC01482.jpg
Paul Kalie
Tinkerer
NSW
TT

Posts: 37
Reg: 02-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 10:53 am, by:  Paul Kalie (Ajzs) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs326.snc3/28918_396086721031_554111031
Aiden Cheese
TryHard
QLD
Soarer jzz30

Posts: 404
Reg: 09-2009

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 11:07 am, by:  Aiden Cheese (Chillpen) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

The numberplate is supposed to be "L4War" isn't it? As in "Looking for war"?
Paul Kalie
Tinkerer
NSW
TT

Posts: 38
Reg: 02-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 11:39 am, by:  Paul Kalie (Ajzs) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

I believe its 1 4 WAR or I 4 WAR
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2167
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 05:19 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Hey, I don't hate the bloke! I didn't even get worked up enough to go looking for his pit bay. I was more annoyed about not bettering my own lap time.

Each time we went out I checked the lap times of the guys around me, so I knew who I had to get out of the way for, and how much gap I needed to leave from the guy in front of me to ensure I never caught him. Getting held up was frustrating, but as much my fault as anyones. I should have realised and just got out of it on the first fast lap to open a gap.

It is part and parcel of lapsprints. There is no opportunity to overtake, except on the straight unless you get waived through.

Plus it was the only interesting video I made on the day.

I'll have to go look at those links now...
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2168
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 05:29 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Just looking at those supra pics- man that is a steep angle for a rear diffuser. There are some who think my 12 degree upsweep is too much on a sedan/coupe shape and it would be more effective at 7 degrees. His must be between 30 and 40 degrees.

Can't seem to get the third URL to work.
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2169
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 06:37 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

http://www.youtube.com/watch?v=m4gLlDUAbvE

I took the video down and cleaned it up before reposting it. I have no desire to be yet another idiot slinging off at some one on youtube etc.
Dan McColl
Goo Roo
Victoria (The Nazi State)
Active V8 and the Beast.

Posts: 2598
Reg: 07-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 06:56 pm, by:  Dan McColl (Hoon) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

You need smooth for aerodynamics. The sharp angle in that diffuser will just cause air separation and significantly reduce the effect of the diffuser.
Andrew McKellar
TryHard
NSW
Soarer Sports Sedan (well, nearly); '84 MA61 Supra.

Posts: 425
Reg: 06-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 07:30 pm, by:  Andrew McKellar (Toymax) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

I reckon this car at Superlap looked heaps better than that Supra Ben...

Upload
Paul Kalie
Tinkerer
NSW
TT

Posts: 40
Reg: 02-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 07:44 pm, by:  Paul Kalie (Ajzs) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Hey Andrew I sent that one to ben on my phone and wrote wish you were here ?????? lol....
Peter Nitschke
Junk Filterer
South Australia
UZZ30 UZZ31

Posts: 11609
Reg: 11-2004

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 07:49 pm, by:  Peter Nitschke (Pen) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Nice Andrew!
Aiden Cheese
TryHard
QLD
Soarer jzz30

Posts: 413
Reg: 09-2009

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 08:06 pm, by:  Aiden Cheese (Chillpen) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)


Ben Lipman wrote on Tuesday, May 25, 2010 - 06:37 pm:


I took the video down and cleaned it up before reposting it. I have no desire to be yet another idiot slinging off at some one on youtube etc.


I like your attitude too :-)

Though the few commy drivers i have met generally have been pretty difficult to get along with and pretty pigheaded about the whole ford holden thing. Thats why i was kind of shocked about his general attitude. Half the reason I got a soarer was to try and stay away from those kinds of people, and the supra/skyline/180sx kinds too. If you know what i mean :-)
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2171
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, May 25, 2010 - 09:05 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Haha Aiden- funny thing is I am a Holden supporter in the V8's and for some reason it transfers across to my perceptions of cars on the road as well. I'll concede that through history there are plenty of nice fords, and the current batch are pretty good lookers, but for some reason, I'm a Holden supporter.

Same with Nissan. The main reason I don't desire a Nissan is the fact they are bloody everywhere. Same with WRX's. In fact I was looking for a WRX to replace the Rx-7 when I saw a black 'Lexus' at the practice the missus was working, talked to the doctor and then had one imported (for waaaaay more than they cost now!!)

Andrew, that is stunning! I have downloaded the Sports sedans regulations and have been having a good look at them. My next move is to replace the door windows with 3mm lexan, and perhaps the side windows as well. Not so sure about the rear window at this stage.

I am then going to tear into the front bar and see what I can create out of it.
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2178
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Thursday, May 27, 2010 - 07:55 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

I picked up a sheet of 3mm Lexan today for $150. It has the 'double UV protection'. I might have a go at replacing the windows this weekend.
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2183
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Saturday, May 29, 2010 - 10:09 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Replaced the passenger window with lexan today. From a single 2400x1200 sheet I should be able to get both windows, the rear quarters, and the rear windscreen cut out.

The difference between the window(4.3kg) and lexan replacement(1.2kg) is 3.1kg. Removing the window mechanism was another 1.1kg, so each side will end up being a 4.2kg saving.

I am going to see how the lexan goes with the power windows. If I can get them to work fine, I'll keep the power window on the drivers side. Otherwise I need to find another method of getting it up and down.

I ended up putting in three little ally tabs to secure the top of the window on the passenger side after watching the video of the High octane GTR flapping around.

Upload

Upload

I am looking at removing this side intrusion bar, but don't know how to go about it. It is attached at each end, and silasticed to the outside skin as well.

Upload
Paul Kalie
Tinkerer
NSW
TT

Posts: 42
Reg: 02-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, May 30, 2010 - 02:38 pm, by:  Paul Kalie (Ajzs) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Looking good mate, Race number looks familar too :-) I cut one of the Side intrusion bars out of the RX7 was a massive pain in the A*&
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2187
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, May 30, 2010 - 08:27 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Yeah, funny how they assigned me the exact same number as I was borrowing from you. Of all the combinations available...at least there is some continuity in my photos. Hopefully it isn't taken down south.

Update: I did the drivers window today. I clamped the lexan to the glass and tried to shape it using a heat gun. I got it hot enough to hurt your skin, but it didn't seem to hold the curve. In the door frame it works with the power windows, but because it isn't curved enough does not engage in the 'track' at the top of the frame. It can be guided by hand from outside, and looks like factory fitment, but doesn't quite work . I'll spend some brain energy on it and find a solution sometime down the track.
Damien Smith
DieHard
NSW
Twin Turbo Manual UZZ31

Posts: 800
Reg: 07-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, May 31, 2010 - 01:08 pm, by:  Damien Smith (Damien) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

When I replaced my sunroof with lexan I also tried to get some curve using the heat gun but as soon as it cooled it went back to flat. Might need more heat + pressure?
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2190
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, May 31, 2010 - 07:18 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

I might have a play with some of the scrap. I bent a small piece in my bending break. I got a nice neat 90 degree bend doing it cold, but a gradual curve is being elusive.
Dan McColl
Goo Roo
Victoria (The Nazi State)
Active V8 and the Beast.

Posts: 2607
Reg: 07-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Wednesday, June 02, 2010 - 05:41 pm, by:  Dan McColl (Hoon) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Probably need to get it hotter.

Do some research on vacumn forming.
Paul Kalie
Tinkerer
NSW
TT

Posts: 43
Reg: 02-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Wednesday, June 02, 2010 - 07:32 pm, by:  Paul Kalie (Ajzs) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

I remember at high school doing some vacuum forming, perspex was in the oven for some time then put in mould... lol you wouldnt want it look like the heap of crap I made.
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2194
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Wednesday, June 02, 2010 - 08:17 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Cheers Dan, looks like you might be right. I found a free PDF on working with Lexan, written by GEStructural products the company who makes Lexan.

For most types of forming you need to get the temperature up to around 150 deg C. I might try 'drape forming' the rear quarter glass as they should fit in the kitchen oven (hope the missus doesn't read this!)

Need a bloody big oven for the rear and side windows though. Might have to dig up an old bar heater and see how hot I can get things. The trick will be getting an even heat.

The mind boggles at the injuries I could do with a big heater...!
Damien Smith
DieHard
NSW
Twin Turbo Manual UZZ31

Posts: 801
Reg: 07-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Wednesday, June 02, 2010 - 08:23 pm, by:  Damien Smith (Damien) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Hopefully not like your welding efforts :-)
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2196
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Wednesday, June 02, 2010 - 09:07 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Whaddayamean? Safe as houses.



I still have one very ugly scar between my hip and groin.
Dan McColl
Goo Roo
Victoria (The Nazi State)
Active V8 and the Beast.

Posts: 2610
Reg: 07-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Friday, June 04, 2010 - 09:58 pm, by:  Dan McColl (Hoon) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)


Ben Lipman wrote on Wednesday, June 02, 2010 - 08:17 pm:

The trick will be getting an even heat.


Yes
Aiden Cheese
TryHard
QLD
Soarer jzz30

Posts: 460
Reg: 09-2009

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Friday, June 04, 2010 - 11:58 pm, by:  Aiden Cheese (Chillpen) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

the oven fan forced?
Dan McColl
Goo Roo
Victoria (The Nazi State)
Active V8 and the Beast.

Posts: 2613
Reg: 07-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Saturday, June 05, 2010 - 10:51 am, by:  Dan McColl (Hoon) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)


Aiden Cheese wrote on Friday, June 04, 2010 - 11:58 pm:

the oven fan forced?


Can you fit a soarer back window in your oven?? If so, Ben would like to come visit.
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2198
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Saturday, June 05, 2010 - 01:48 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Hahahah.

The oven is fan forced. I havent measured it up yet, but I might be able to get the side quarter glass windows in there. There isn't a need, really, but now my curiousity is piqued and I want to try it.

I'd love to find an oven to fit all the windows in. Maybe some type of fabrication joint would have one. I might have to give the Lexan supplier a call and see if they can do something.

The other option is looking around to see if I can hire industrial type heaters. Not much of a demand for them up here I guess...
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2199
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Saturday, June 05, 2010 - 11:32 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Got bored tonight so I cut the front bumper up. The aim is to get more air into the radiator and coolers. I am going to have to take the bumper off to reposition the oil coolers and make up all the ducting, but this will give an idea of where I am heading. I need to find something to form the air dam, as the garden edging is no tall enough now the rubber lip has been removed.


Upload

Upload
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2201
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, June 06, 2010 - 08:27 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

I went out to Bunnings today and bought some wider garden edge. I redid the air dam and I am much happier with it. The plastic is fairly easy to work with, using a hot air gun and a bending brake.

Upload

Upload


I The pulled the front bar off and moved the oil cooler forwards and started boxing everything up for better control of the air flow. It has got me thinking about brake ducting as well now...

Upload
Adam Lonergan
Goo Roo
Victoria
UZZ32 #369 (V8)

Posts: 1178
Reg: 08-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, June 06, 2010 - 09:26 pm, by:  Adam Lonergan (Alchemistal) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Most pottery places will have a large kiln/oven out the back which are typically under-utilised and would easily hold 150°C for as long as you need. The big walk in units would give you the option to easily work with the heated material, possibly more than once.
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2206
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, June 13, 2010 - 11:07 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Well, I am getting close to finishing the front bar. The coolers are all ducted and boxed in. The radiator opening is enlarged. There is more front splitter available to generate downforce, and the intercooler is ducted to the radiator.

The headlights are only sitting in location and there are a few bolts left to do up, and I am toying with the idea of plumbing in some ducting for the front brakes, but essentially I am done.

Next is to go back and tackle the rear and quarter windows. After I clean the bloody shed!



Upload

Upload

Upload
Andrew McKellar
TryHard
NSW
Soarer Sports Sedan (well, nearly); '84 MA61 Supra.

Posts: 430
Reg: 06-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, June 14, 2010 - 07:38 am, by:  Andrew McKellar (Toymax) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Will you be able to get it off the ramps with all that on the front end now?

Get a big cardboard box, big enough to hold the windows or windscreen, and use more cardboard to run a duct into it from your fan-forced oven (with the oven door open). It'll take a little while, but the oven will heat the inside of the box up enough for what you want to do.
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2208
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, June 14, 2010 - 08:15 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)


Andrew McKellar wrote on Monday, June 14, 2010 - 07:38 am:

Will you be able to get it off the ramps with all that on the front end now?



Funny you should say that. No. Apparently not. It isn't any lower, but must sit a few mm further forward than before. I packed the ramps with wood and stuff, but it still snagged. I just give it a nudge and it came off.

I think it is time to build my own ramps.


Andrew McKellar wrote on Monday, June 14, 2010 - 07:38 am:

Get a big cardboard box, big enough to hold the windows or windscreen, and use more cardboard to run a duct into it from your fan-forced oven (with the oven door open). It'll take a little while, but the oven will heat the inside of the box up enough for what you want to do.



Have you done this? I'd be concerned the lot would catch fire...

I 'gutted' the passenger door today. I was going to measure up the side windows but got sidetracked. I made a door card out of 5mm coreflute sheet. ($8 from bunnings)


Upload

Upload

Upload


I managed to save 9.5kg on the passenger door.
Window replacement - 3.1kg
Window winder mech - 1.2kg
Superfluous steel - 1.0kg
Side intrusion bar - 2.6kg
Door mirror - 1.6kg

Of course I need to fit a replacement mirror but I imagine a motor bike mirror or similar won't weigh too much.
Damien Smith
DieHard
NSW
Twin Turbo Manual UZZ31

Posts: 802
Reg: 07-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, June 14, 2010 - 08:36 pm, by:  Damien Smith (Damien) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

It all adds up doesn't it. Nice duct work too.
Aiden Cheese
DieHard
QLD
Soarer jzz30

Posts: 550
Reg: 09-2009

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, June 14, 2010 - 10:08 pm, by:  Aiden Cheese (Chillpen) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Why don't you make one of those leather strap meshes for track days to sit over the passenger's door.. and just take the whole door off. its huge and heavy. Throw it back on after track and you've got your power windows etc again...
Ben Lipman
Goo Roo
NT
Soarer TT manual, plus TT track car

Posts: 2209
Reg: 04-2006

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, June 14, 2010 - 10:44 pm, by:  Ben Lipman (Ben12a) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

What..?
Damian Ware
Goo Roo
Victoria
UZZ32

Posts: 1575
Reg: 10-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, June 14, 2010 - 10:51 pm, by:  Damian Ware (Frozenpod) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Aiden, you don't think the door is part of the cars structure at all?
Layton Molenaar
Tinkerer
SA
Singe turbo

Posts: 67
Reg: 12-2009

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, June 14, 2010 - 11:06 pm, by:  Layton Molenaar (Rbdestroyer) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

have you got a total weight atm?? good work man
Andrew McKellar
TryHard
NSW
Soarer Sports Sedan (well, nearly); '84 MA61 Supra.

Posts: 431
Reg: 06-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Tuesday, June 15, 2010 - 07:25 pm, by:  Andrew McKellar (Toymax) Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)


Ben Lipman wrote on Monday, June 14, 2010 - 08:15 pm:

Have you done this? I'd be concerned the lot would catch fire...


Yep, we've done it. Used it as a big autoclave type oven and got it up to about 190-degrees. Of course, you should still keep an eye on it, and because it is in the kitchen make sure the wife is at work the day you do it.

  Administration Administration      Log Out Log Out Previous Previous      Next Next