Tuesday, March 28, 2006 - 03:35 am, by: Roger Costello(Roger)
Benny
Edward has a UZZ32. Reconditioning the pump is an epic and will cost much, much more than $50 for the kit. I have not ever seen a reconditioned UZZ32 pump for sale. I sincerely hope it is not the pump that is causing the problem.
Tuesday, March 28, 2006 - 09:13 pm, by: Edward Engerer(Edward)
hi guys thanks for your help i will start on the pump in the next few days i will get back but at the moment i still got issues about the brake actuator it is pumping on oand off i bled the cylinder and the actuator three times still the same if i know the actuator is faulty i will buy it tomorrow but how will i know can you guys help me out greatly appreciated
Tuesday, March 28, 2006 - 11:05 pm, by: Edward Engerer(Edward)
Hello Dan thanks for the info its a great help. I have found some information regarding the actuator but i cant find the nitrogen volume pressure to fill the actuator otherwise i would do it like i did with the struts. Also i found that the 2uzfe 4 runner got the same master cylinder being a australian delivery i thought i would ring up VACC to give me the info but they said it has to be replaced and no information available. Looks like i have to buy very very soon brakes are spongy thanks again ted
Friday, July 21, 2006 - 09:45 pm, by: Neil Griffiths(Aussiesc)
Adam, The oil leak that the Trac Master does is just one small seal at the end. Have to remove cylinder to do it..Then semi dissasemble..Not that hard to do..