Monday, February 16, 2009 - 11:19 pm, by: Shane Haverkamp(Havabeer)
well my gf bought me 2 gauges for xmas and i finally got around to getting them both in.
my original plan was to have a mechanical oil pressure instead of the volt meter. but after some reading on here about special adapters and oil in the cabin i decided against it.
i also found it easier and looks better by moving the cd player down the bottom as the lower section of it is on more on an angle then the top and it was harder getting the backing flush up against the ash tray.
also may have to shimmy it across just a little to the right to block up the gap there
thoughts?
i've done a poo-brown -> black conversion but haven't done some bits, hand brake handle and a few of the knobs still need changing.
Tuesday, February 17, 2009 - 09:46 am, by: Shane Haverkamp(Havabeer)
yeah i did the wood grain bit my self as well
(my borther works in a vinyl printing place) so i got him to print me up some wood grain and i put it on. its a bit rough in some places but i'm pretty happy with it.
vinh, is where your turbo timer is still a ash tray compartment? or did you remove that all together?