Author |
Message |
Ashley Leach
Goo Roo South Australia GT Limited UZZ31 V8
Posts: 1124 Reg: 02-2006
| Anyone have the part numbers for the replacement Air strut unit? Are the front and rear part numbers different? |
Glen Muller
TryHard Victoria V8 Soarer UZZ31
Posts: 391 Reg: 12-2007
| The guy at Pedders told me the right and left fronts are different, so I'd imagine the rears are too. Not sure about part numbers, but I hope you're cashed up! |
Peter Nitschke
Junk Filterer South Australia UZZ30 UZZ31
Posts: 9476 Reg: 11-2004
| Ashley, all 4 are different part numbers. I have the numbers here somewhere, which ones are you after? |
Ashley Leach
Goo Roo South Australia GT Limited UZZ31 V8
Posts: 1125 Reg: 02-2006
| All 4 if I could...
Glen Muller wrote on Thursday, June 05, 2008 - 08:59 am:but I hope you're cashed up!
HA! we will see... |
Evan Kaio
TryHard Wellington '91 UZZ31
Posts: 141 Reg: 01-2007
| Front RH 48010 29036 LH 48020 29016 Rear RH 48080 24061 LH 48090 24061 These part No's maybe different. I had the rears priced 26/9/07. The fronts were bought 4/07. |
Ashley Leach
Goo Roo South Australia GT Limited UZZ31 V8
Posts: 1135 Reg: 02-2006
| Thanks Evan, Can anyone confirm? |
Don Bagnall
Moderator New Zealand Mercedes Benz SLK230 Kompressor
Posts: 6740 Reg: 05-2005
| Here ya go Ashley................Color coded for your viewing pleasure
|
Mike Beck
Goo Roo New Zealand Soarer Limited UZZ31 & Soarer 3.0GT JZZ31
Posts: 2076 Reg: 11-2005
| Ah very helpful Don. Hope you get your Airbags sorted Ashley without too much of a strain on the wallet! Im just glad my 31 will be blessed with removal of its air suspension system with some conventional shocks and springs when I have the time to do it. It will be a UZZ30 with all the bells and whistles to boot then! Brilliant! |
Ashley Leach
Goo Roo South Australia GT Limited UZZ31 V8
Posts: 1140 Reg: 02-2006
| Ohhh thanks so much Don. We will see how much I can get them for otherwise I'll be swapping them over for some Bilstien Coilovers... I do love my airbags though. I also read about some aftermarket controllers where you can get the "TEMS Hard" setting from inside the cabin, save getting out the paper clip. No one knows which controller does this do they? |
Evan Kaio
TryHard Wellington '91 UZZ31
Posts: 144 Reg: 01-2007
| Don, Do the part No's I have for the rears come up on your EPC? |
Peter Nitschke
Junk Filterer South Australia UZZ30 UZZ31
Posts: 9492 Reg: 11-2004
| Evan, those rear numbers are correct and have superseded Don's numbers. |
Don Bagnall
Moderator New Zealand Mercedes Benz SLK230 Kompressor
Posts: 6741 Reg: 05-2005
|
Evan Kaio wrote on Friday, June 06, 2008 - 05:01 pm:Don, Do the part No's I have for the rears come up on your EPC?
No Evan, they don't. I suspect that, as Peter says the supersession happened after the parts EPC came out (2003). |
Evan Kaio
TryHard Wellington '91 UZZ31
Posts: 147 Reg: 01-2007
| Hmmm.. Looks like R&B Toyota are on the ball. (as usual). |
David Goldthorpe
Tinkerer NSW UZZ31 GT-L
Posts: 32 Reg: 11-2007
|
Ashley Leach wrote on Thursday, June 05, 2008 - 11:03 pm:I also read about some aftermarket controllers where you can get the "TEMS Hard" setting from inside the cabin, save getting out the paper clip. No one knows which controller does this do they?
Ashley, I've got the Data Systems ASG-63x height controller, which has the "TEMS Hard" option. There may be others. http://www.r-spec.com/electronics/asg/asg.html |
Ashley Leach
Goo Roo South Australia GT Limited UZZ31 V8
Posts: 1145 Reg: 02-2006
| Is it for sale? Whoops, I emailed those PN cataogle numbers off... might explain why I haven't gotten a price back. LOL |
Peter Nitschke
Junk Filterer South Australia UZZ30 UZZ31
Posts: 9496 Reg: 11-2004
| Any Toyota dealer should be able to reconcile the new part numbers against the old ones. |
David Goldthorpe
Tinkerer NSW UZZ31 GT-L
Posts: 34 Reg: 11-2007
| Not for sale, Ashley. I think you can get them new for about $500 with wiring harness. |
Ashley Leach
Goo Roo South Australia GT Limited UZZ31 V8
Posts: 1148 Reg: 02-2006
| Where from? |
David Goldthorpe
Tinkerer NSW UZZ31 GT-L
Posts: 35 Reg: 11-2007
| Not sure, mine was already installed when I bought the car. I guess you would have to find a local "Data Systems" distributer or have one posted from Japan. |
Ashley Leach
Goo Roo South Australia GT Limited UZZ31 V8
Posts: 1151 Reg: 02-2006
| i just ordered an ASE664 from Jeff Harper. New from Japan with Harness and a remote! |
Ian Johnston
Goo Roo South Australia UZZ30 GT 4.0, UZZ31
Posts: 1066 Reg: 07-2005
| Just an update on part numbers. RHF 48010 24051 LHF 48020 24031 RHR 48080 24061 LHR 48090 24061 And Toyota have some in stock. $1,200 +gst each |
Michael Toet
TryHard Vic V8
Posts: 113 Reg: 06-2009
| Nah, $895 a Castle Hill. http://www.castlehilltoyota.com.au/local_imported_parts.php Daniel L (and others) know the guy to talk to, I can't remember his name off the top of my head. Have a quick search of the forums. Cheers, Mike |
Daniel Lee
Goo Roo Victoria Soarer GT Limited UZZ31 V8
Posts: 2023 Reg: 07-2005
| Contact James Sloane at Castle Hill toyota: jsloane@chtoyota.com.au Also Chris Castle at Penrith Toyota: ccastle@penrithtoyota.com.au Contact them and get quotes and see which one is cheaper! |