Last x Days Posts  1 | 3 | 7 Days  Search  Topics  Tree View  Help
  Soarer Central * Suspension * Replacing Tailshaft Donut Previous Previous    Next Next  

Author Message
Tim Ross
DieHard
Qld
V8 50RRA

Posts: 554
Reg: 09-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 10:59 am, by:  Tim Ross (Retox) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Hey all,

Real quick one. I've dislodged a bit of dandruff looking at the rubber peice between the tailshaft and the diff and for the life of me cant suss out how to take it out without removing the whole diff

I've undone the rubber peice from the tailshaf/diff, I have even undone the diff drom the body (3 bolts rear, 2 bolts front), but left the axles onand have it supported by a trolley jack.

The jack has been raised and lowered trying to find room to get this thing off... however no cannot do due to the shaft from the diff still not having enough room to clear the donut.

I spoke to Ramyn, he mentioned the diff doesnt need to be dropped at all, but to just wedge a bar or something between the tailshaft and donut (after undoing the tailshaft from the donut).... but after trying, it looking at it and thinking the tailshaft really doesnt have anywhere to go by doing this... I'm left thinking, apart from dropping the whole bloody diff, how the hell am I meant to remove this bloody thing?

Any advice on an EASIER way to swap this thing over?
Matt Petersen
TryHard
NA
V8

Posts: 485
Reg: 01-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 01:27 pm, by:  Matt Petersen (Mattmannz) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Having done a diff swap the only way I could see this working would be to drop the centre bearing or the diff.

Matt.
Tim Ross
DieHard
Qld
V8 50RRA

Posts: 556
Reg: 09-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 02:02 pm, by:  Tim Ross (Retox) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

yeah... that has been the plan of attack we are trying now... centre bearing support undone and also rear bracket removed.

Have noticed the tailshaft does have a bit of front/back movement to play with not that the centre bearing support is undone.

now just trying to bolt back upp the diff so that it doesnt move whenever the tailshaft is pulled on.

reckon we might be onto something here

If this works, at least this topic may help someone else looking to do the same thing later on... will update on progress... if anyone else has any suggestions, feel free to let us know :-)

At this point I'm happy to think the diff may not need to be removed... see how it goes
Mike Beck
Goo Roo
New Zealand
Soarer Limited UZZ31 V8

Posts: 3414
Reg: 11-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 02:18 pm, by:  Mike Beck (Gold_40gt) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Center bearing is the way.
Tim Ross
DieHard
Qld
V8 50RRA

Posts: 558
Reg: 09-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 03:44 pm, by:  Tim Ross (Retox) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

spoke too soon... seems the locating pin doesnt want to let go of the fcuking tailshaft



Upload

Upload

Upload
Tim Ross
DieHard
Qld
V8 50RRA

Posts: 559
Reg: 09-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 03:57 pm, by:  Tim Ross (Retox) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

fcuk this... diff coming out.

three cheers toyota for having the foresight to make a car easy to work on.
Justin Camilleri
DieHard
QLD
Had a 85 MZ10, 92 TT, Now 91 TT

Posts: 975
Reg: 07-2005

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 04:09 pm, by:  Justin Camilleri (Just) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Dear oh dear....

Just think Tim, you will be doing this all over again on the TT.
Tim Ross
DieHard
Qld
V8 50RRA

Posts: 560
Reg: 09-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 04:14 pm, by:  Tim Ross (Retox) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

dont remind me justin :-)

I guess they have to keep their service mechanics in employment one way or another.
Tim Ross
DieHard
Qld
V8 50RRA

Posts: 561
Reg: 09-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 04:48 pm, by:  Tim Ross (Retox) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

oh well... I'm done for the day... pissed enough of my weekend up the wall already on this thing... looks like its staying on stands for the week until next weekend where I will have to waste even more time on it.

If anyone has any suggestions in the meantime, I'd be glad to hear them... because I'm sure as hell stumped on it

Took three bolts out of one axle and then realised the fun I had swapping a diff last time... would REALLY like to avoid that doing that again if I can.

Right now though the best thing I can do is walk away from it as its becoming way too frustrating :-) (and because the voices in my head keep telling me to take the hammer and use it on whole vehicle hahaha)
Scott Wilkes
TryHard
Tasmania
92 TT Factory Manual

Posts: 303
Reg: 10-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 05:26 pm, by:  Scott Wilkes (Scottywilkes) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

weird, i replaced the clutch in my transmission about 3 months ago and mine just slipped straight out, undid the centre bearing, pulled the driveshaft of the pin, slid it back towards the diff to clear the shaft of the trans spline and dropped the transmission, theres nothing to it. Unless of course the pin decides to seize to the shaft HAHA.
Michael Keen
Goo Roo
nsw
Soarer TT

Posts: 1586
Reg: 10-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 06:22 pm, by:  Michael Keen (Spoilt) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

yer took me about 10 mins to get my shaft out, tim you have my number
Tim Ross
DieHard
Qld
V8 50RRA

Posts: 563
Reg: 09-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 06:31 pm, by:  Tim Ross (Retox) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

I dont think I saved it Mike... and the last thing I want is to be harassing you every time I start having a vehicular inspired tourettes session... your missus will start to wonder hahaha
Michael Keen
Goo Roo
nsw
Soarer TT

Posts: 1587
Reg: 10-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 07:13 pm, by:  Michael Keen (Spoilt) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

it's ok mate, i dont mind really. i do it everyday. so no hasel at all mate. cheers. if ya cant get it sorted give me a ring.

you will have to drop the centre bearing. leave the diff bolted in place. drop centre bearing indo rear bolts of the tail shaft, and the tail shaft should push into the tranny far enough so that it will drop of the diff. cheers.

it is really simple.. yours might be sized but.. but still should come off.

anyway ring me if ya have problems cheers
Tim Ross
DieHard
Qld
V8 50RRA

Posts: 564
Reg: 09-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 08, 2009 - 11:44 pm, by:  Tim Ross (Retox) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Hey Mike, thanks for the tips :-)

Centre Bearing support was already undone.

I decided to removed the heat shields intront of the axles (from where the 1st set of factory mufflers sit)... gave me a lot more room to come in at the yolk from the sides

Anyways, with the extra space from doing that, I was able to try wedging off the tailshaft from a fe different angles and eventually got it off there! It was stuck on there good alright... puzzles me why.

Such a relief... got the new donut on, and got the tailshaft all bolted back on by about 8pm

Anyways, thanks for the asistance guys... hopefully it will be easier next time around now that I know this little trick :-)
Scott Wilkes
TryHard
Tasmania
92 TT Factory Manual

Posts: 305
Reg: 10-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, March 09, 2009 - 09:33 am, by:  Scott Wilkes (Scottywilkes) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

if possible, i would lather the locating pin with some copper grease, this will stop it from rusting together in the event that you may need to remove it again for some reason or another.

BTW Where did u get the donut? I need 1 for my car as its got a few cracks in it. Thanks
Tim Ross
DieHard
Qld
V8 50RRA

Posts: 567
Reg: 09-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, March 09, 2009 - 12:44 pm, by:  Tim Ross (Retox) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Bought it off some guy on ebay... paid $120 inc freight

I think it was a one off private sale, but it was in mint condition.
Scott Wilkes
TryHard
Tasmania
92 TT Factory Manual

Posts: 306
Reg: 10-2008

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, March 09, 2009 - 01:04 pm, by:  Scott Wilkes (Scottywilkes) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

il keep looking then :-)
Tim Ross
DieHard
Qld
V8 50RRA

Posts: 568
Reg: 09-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, March 09, 2009 - 02:08 pm, by:  Tim Ross (Retox) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

If I come across one I will PM you :-)
David Tra
DieHard
qld
TT

Posts: 612
Reg: 11-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Sunday, March 15, 2009 - 10:28 pm, by:  David Tra (Bookie) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

Tim did you replace the tail shaft bearing? I think mine is on the way out. I am experiencing a clunk when I release throttle at gear changes. I thought it was the diff but that got replaced :-).

You guys havnt been looking hard enough, if you check the for sale section. You will notice there is rear coupling for sale :-)
Tim Ross
DieHard
Qld
V8 50RRA

Posts: 579
Reg: 09-2007

Top of pagePrevious messageNext messageBottom of page Link to this message

Rating: N/A
Votes: 0 (Vote!)

Monday, March 16, 2009 - 12:16 am, by:  Tim Ross (Retox) Quote hilighted text Edit Post Delete Post Print Post   View Post/Check IP (Moderator/Admin Only) Move Post (Moderator/Admin Only)

You mean the centre bearing David?

I'm still having the problem... at crawling speeds it feels like my rear passenger side wheel is oval shaped and it causes a ticking at each revolution

This creates a vibration at higher speeds which goes through the car, and the god awful knocking sound from the rear end.

I'm absolutely certain there's nothing wrong with the wheel, and if it where wheel balance it wouldnt be doing it at snail speed... but I will get it checked out just to satisfy that curiosity.

Other than that, the new owner-to-be is aware of the problem and is aware that he is buying the car 'as is'. I said I'd try fixing it, but if I couldnt then its up to him (which he is ok with)... see how I go.

Add Your Message Here
Eye Candy
Click for full size
Bold text Italics Underline Center Text Upload photo from your hard drive Make a List Make a Table Make an Image Thumbnail Create a hyperlink Insert a clipart image Formatting Help
         

Username: Important Posting Information:
If asking a question, have you done a search to see if your question has already been answered?
Be aware that the use of SMS-speak eg "u" instead of "you" etc, will get your post deleted.
Password:
Enable HTML code in message
Automatically activate URLs in message

  Administration Administration      Log Out Log Out Previous Previous      Next Next