Sunday, January 17, 2010 - 05:04 pm, by: Scott Wilkes(Scottywilkes)
took me 20 mins to change mine out, mind you this is on a hoist.
the main body bush is easy, just unbolt the clamp, slide the old bush out, new bush in and bolt up again.
The 2 smaller bushes slightly harder, these run a metal sleeve down the centre. What i did was get a screw driver in them, and lever side to side, this slowly pulled the bush out of the lower and upper bush. Then just fit the new superpro bushes, slide the metal sleeves in and bolted it up
I didnt say WOOOOOOOOW, as my old ones were in good nick still, but the steering is definately more responsive