Sunday, April 03, 2011 - 07:26 pm, by: Chris Milner(Milnuts)
Just wanted to get some opinion on what a vibration might be after i put a torsen lsd into my 91 soarer. Took a few hours on jack stands but everything was done properly, fresh diff oil 80-90w, about 1.6-1.7l. new grease on ends of driveshafts, lsd works well but if creep above 110kmhr the vibration gets noticebly worse. All bolts were tightened with a solid breaker bar and is not loose. It also is a bit worse when deaccelerating, smooth around corners. Any thoughts? Iam getting a wheel alignment asap.
Ben Lipman Goo Roo SA Soarer TT manual, plus TT track car
Sunday, April 03, 2011 - 08:30 pm, by: Ben Lipman(Ben12a)
Tailshaft.
I'd say it is now out of balance. Try unbolting it at the diff end and rotating it 90 degrees and see if that sorts it out. If not try another 90 degrees.