Sunday, March 26, 2006 - 11:28 pm, by: Ross Francis(Au_celsior)
Gday guys, first post here...please be gentle. Have just bought a 90 Celsior, air suspension height seems to be working fine, but i cant feel any decernible difference between NORM and SPORT in the TEMS settings. It feels to me like its on the SPORT all the time. Dash lights indicate whichever setting is selected ok. Is there any way i can tell if its functioning correctly, and will a reset help? Is a reset possible without disconnecting the battery? Thanks in advance.
Monday, March 27, 2006 - 02:19 pm, by: Ken Bruns(Uncle_ken)
Ross, while I feel there is a difference in the ride as such, is IS extremely subtle. My belief is that there is more of a difference in the bodylean in cornering rather than the ride per se. Try it on your favourite winding road and see what you think.
Monday, April 03, 2006 - 12:23 pm, by: Ross Francis(Au_celsior)
Just an update on my original post, i pulled the back seat out to check the TEMS solenoids and the bolts holding them down on the drivers side were loose, so even though there was a signal for norm and sport, one side was permanently on sport even in the norm setting. All seems ok now. One thing i noticed also is that even in norm setting, over a large bump the shocks go to sport for a fraction of a second to settle the bounce down. All i need to find out now is how to remove the side c-pillar trim pieces so i can replace the rear deck trim panel without bending and breaking it, as i almost did getting it out.