Saturday, March 15, 2008 - 07:06 am, by: Russell Rohde(Ax0n)
After Completeing my BFI, I thought I'd share the panel dimensions just to help everyone out. My Soarer is a 91 JZZ30, so from what I've read, I assume it is the same for all models. (Being unemployed for the first time in 10 years - I have way too much time on my hands!!)
This is the side panel that fits between Airbox and Radiator.
And this is the top plate that covers from Top of airbox to above drivers side head light: After I first did a cardboard cutout, I found the top edge (horizontal line right at the top of image) a little out of shape (dosent extend 'up' enough). I made some mods after doing the cardboard cutout so mine is slightly different. The below diagram works perfect - I'm just picky. Also, I covered this in 10mm thick foam with the metal film facing up. After fitting and covering with foam, you will most likely need to trim 2 semi circles from the front edge above headlight - This is due to the 2 rubber stoppers mounted on the bonnet. The bonnet will still close but there will be a 2 - 3mm hap on drivers side of bonnet. (I found this on the SoarerCentral.com website - Cheers to Paul Irwin)