Wednesday, March 14, 2007 - 02:21 pm, by: Steven Reid(Steve)
Ok, before anyone says anything, yes i have tryed searching! This topic has been touched on before, but not quite the info I'm after.. I have a tvix unit, and am trying to hook it up to my EMV. The main question being, is it possible to switch video without the factory head unit? I have a custom stereo and would like to intergrate the tvix into it. I have a factory head unit sitting in the garage just in case, but with no face plate and i don't know what loom from behind the emv plugs into it. Any help would be greatly appriciated
Wednesday, March 14, 2007 - 03:33 pm, by: Lynden Phillips(Malicia)
My understanding is that you need the factory unit to switch to the EMV/TV I was missign the factory unit and had to source one from Mark to get my Tvix to work.
Wednesday, March 14, 2007 - 05:07 pm, by: Steven Reid(Steve)
Thought that might be the case. How exactly is yours wired up.. I'm a bit lost as exactly how to get the video running through the EMV. The audio i will just run through the AUX port in my head unit. But some help with wiring up the EMV video and the stock head unit would be greatly appriciated
Previous
