Tuesday, February 14, 2006 - 10:36 pm, by: Anthony Wah Day(Naastee)
Hey guys and gals,
Well i finally did it this is a custom install my dad and I did over the weekend.
This is what i have (Whole system ALPINE)
1 x CDA-9851 (MP3/WMA CD Receiver) 1 x MRP-F240 (4/3/2 Channel Power Amp) 1 x MRP-M350 (Mono Power Amp) 1 x SWS-1241D (12' S Tpye Sub 4Ω + 4Ω) 1 x SWS-1222D (12' S Type Sub 2Ω + 2Ω) 1 x SPS-690A (Coaxial 3-way 6x9's ) 1 x SPS-171A (Component 2-way 6 ½' Speakers)
Thursday, February 16, 2006 - 11:45 am, by: Murray Allen(Rusty)
Looks good.
only issue i see is with the gear ie. subs. 2 different impedence subs? Im assuming the monoblock is powering them both. what load have you wired them to?
Thursday, February 23, 2006 - 05:59 pm, by: Anthony Wah Day(Naastee)
Brain,
i wouldn't really know hey the box's are custom so u will have to make them 2 specs, and bit with the spare would be harder cause its not a space saver
Wednesday, March 01, 2006 - 12:55 pm, by: Anthony Wah Day(Naastee)
daniel,
no plans made took my self and my dad about a month, cause i work alot we did it in stages, if u have a look at boot u will see like a little brace thing that goes sorta from the parcel shelf to the ground but on the side, the box's actually curv around that, it was quite hard hey.
also we didn't even worry about the litreage of the sub box's cause we knew we couldn't get a box made in that space with the correct litreage.
wow...nice job does the subs pump hard in those boxes?? i thought literage is fundamental for the subs to pump well. and did u seal the back of the boxes?
Thursday, March 02, 2006 - 05:59 pm, by: Anthony Wah Day(Naastee)
Steve:
thats what i thought about the literage, but the subs pump hard, but i put some stuffin in the box's so it helps a little. and yes the whole box is sealed
Monday, March 13, 2006 - 12:25 am, by: Anthony Wah Day(Naastee)
Hey Everyone
To the people that are wanting the measurements for the sub box's please these are CUSTOM and were made by trail and error so there are NO MEASUREMENTS