Author |
Message |
Mike Beck
Goo Roo New Zealand Soarer Limited UZZ31 V8
Posts: 3233 Reg: 11-2005
| 1 5/8 4-2-1 Headers
I figured the standard size was sufficient for me, being that the exhaust outlet ports are 35mm in diameter and the header inlets are around 38mm-40mm in diameter. Should do the trick perfectly for my application.
|
John Lucas
Tinkerer NORTH ISLAND V8 GT-L UZZ32
Posts: 21 Reg: 11-2005
| Mike HI, where did they come from and what was final cost? |
Mike Beck
Goo Roo New Zealand Soarer Limited UZZ31 V8
Posts: 3237 Reg: 11-2005
| Hi John! Hope you had a good Christmas and New year. They were from Neil. (Rush Imports) Cost was $800NZD delivered. I painted them in that silver colour a few days ago, they came with a dark teal heat paint standard. I shall be fitting them when my engine work is done and then they can slip in place along with the rebuilt heads onto the block, Probably some time next month.
|
Joe Russell
TryHard Marlborough 4.0 V8 GT-L
Posts: 152 Reg: 10-2008
| Need more exhaust tape. |
Blake Gloyn
TryHard manawatu soarer JZZ30 TT
Posts: 384 Reg: 02-2006
| are you set for next weekend joe? I'll bring the high octane and tyres, you bring your car, drivers licence and helmet |
Matthew Sharpe
Goo Roo North Island JZZ31
Posts: 4050 Reg: 10-2005
| Noice Mike, looking forward to seeing & hearing the final results! |
Joe Russell
TryHard Marlborough 4.0 V8 GT-L
Posts: 158 Reg: 10-2008
| Yes Blake I am! It'll be interesting to see what my near stock V8 will do... lol this hopefully: I'll make sure to pick us up some beers for after |
Matt Petersen
TryHard NA V8
Posts: 432 Reg: 01-2008
| Are you guys racing at Masterton again? I will be bringing my stock V8 over. Matt. |
Joe Russell
TryHard Marlborough 4.0 V8 GT-L
Posts: 159 Reg: 10-2008
| This might turn into a bit of a meet... |
Evan Kaio
TryHard The Hutt '91 UZZ31
Posts: 334 Reg: 01-2007
| Might see you fullas over there. |
Mike Beck
Goo Roo New Zealand Soarer Limited UZZ31 V8
Posts: 3245 Reg: 11-2005
|
Matt Petersen wrote on Sunday, January 25, 2009 - 03:55 pm:I will be bringing my stock V8 over.
Oh, is this another Soarer of yours Matt? |
Matt Petersen
TryHard NA V8
Posts: 433 Reg: 01-2008
| Haha, nah same one Mike. The motor is stock.... Still haven't finished fitting the M90, work has just taken every single hour of my time since the trial fit in early November. Going to have to take some time off work I think to finish it off. Have new fuel fittings and braided line, new gasket set and a few other bits and bobs to throw on it when I finally get a change. Evan/Joe/Blake, what days are you guys looking to go over? Matt. |
Shyam Purushothman
TryHard Dorkland 2jzgte toyota Soarer
Posts: 402 Reg: 08-2005
| is this v8s only |
Blake Gloyn
TryHard manawatu soarer JZZ30 TT
Posts: 385 Reg: 02-2006
| No,imports that are 4cyl or 6 cyl or rotary compete in one class, but the v8 soarers will need to compete in C8, which is dial your own. You have to be there before 9am on sat. You can't race on sunday if you didn't race on sat. |
Joe Russell
TryHard Marlborough 4.0 V8 GT-L
Posts: 160 Reg: 10-2008
| Oooh that's gonna be nice Matt. Any idea what the racing fee is Blake? |
Blake Gloyn
TryHard manawatu soarer JZZ30 TT
Posts: 386 Reg: 02-2006
| 20 bucks gate fee. about 25 to race, unless you need to buy a sportsman licence(i doubt that you already have one) which is another$100,(lasts 12 months) or alternatively a day licence for $50.Not cheap, but you can race again on sunday for no further cost. |
Joe Russell
TryHard Marlborough 4.0 V8 GT-L
Posts: 163 Reg: 10-2008
| Hmm... wether to buy 12 months or just a day... Cheers Blake, see you sat. |
Evan Kaio
TryHard The Hutt '91 UZZ31
Posts: 335 Reg: 01-2007
| I'll do my best to get over there Saturday morning. |
Joe Russell
TryHard Marlborough 4.0 V8 GT-L
Posts: 177 Reg: 10-2008
| Good man. I want to see your new tail lights and dash |