Monday, August 15, 2011 - 06:35 pm, by: Oleg Akulshin(Sliqu3)
Just wondering if it possible to fit a stock camera to a soarer with emv screen which didn't have it as an option? I have a soarer that i am wrecking that does have one, so i am wondering if i need to connect a cable to my EMV and then run it to the controller in the boot and then to the spoiler? or would my EMV non-camera car already have a right cable in the boot so i can just screw in the controller and the spoiler?
Monday, August 15, 2011 - 07:58 pm, by: Cameron Cuddihy(Cam)
It should be pre wired for the camera Oleg, you will need the spoiler, camera, computer that is in the left side of the boot under the covers plus the cable that runs from the computer to the camera.
Monday, August 15, 2011 - 09:00 pm, by: Michael Toet(Myke31)
You can wire up an after market reverse camera. I did this for less than $20. Maybe $21 if I costed in the connectors, but I had most that stuff lying around. You don't need the spoiler, camera etc.