Sunday, May 03, 2009 - 04:57 pm, by: Sami Ansari(Thesaint)
Recently I purchased some 97 tail lights however they didnt come with light bulbs or the plugs.
At the time I didnt think this was a big deal, however after finally getting around to install them I found that the current plugs and lights do not fit in the 97 sockets (upgrading from 94 tail lights)
What I wanted to know is whether their is a way to get around this ?
Sunday, May 03, 2009 - 07:54 pm, by: Aaron Casey(Blownminiturbo)
thats no good the only other way would be to try match up the sockets with ones from wreckers and make your own or find a car with smashed 97 tail lights and see if the harness and sockets are ok
Friday, May 15, 2009 - 06:43 pm, by: Sami Ansari(Thesaint)
Okay got myself the sockets globes and loom
Found the tute on the forum for the capacitor change
Just wanted to know if there is someone that can do the flasher tute mod for me on the forum, as I have had some bad experiences with soldering irons haha
Sunday, May 17, 2009 - 06:24 pm, by: Mike Dobkin(Razman)
If you don't fancy soldering a capacitor into the flasher unit you might try grafting a 35w halogen bulb to replace the existing 21w flasher bulb - it should make the flash rate nearly standard.