Saturday, April 14, 2007 - 10:34 am, by: Kyle Wathen(Cspot)
Might be best to email the seller and ask if it was designed for a soarer or supra. Apparently you can run into problems with them fouling if you try put a supra one on your soarer and vice versa...
Saturday, April 14, 2007 - 12:10 pm, by: Lew Radbourn(Marlew)
ask Jeff Smith,Neil Griffith and my self if thay are a direct fit and we all will tell you that it is hit and miss (depends on what the guy was supplied) Not all of them will fit the 1jz that is in a soarer
Saturday, April 14, 2007 - 07:50 pm, by: Kim Nguyen(Kim)
A friend of mine knows the person who sells them and apparently the design has changed to clear the chassis. A friend just fitting a set to his z20 soarer with no dramas.
Saturday, April 14, 2007 - 08:24 pm, by: Jeff Smith(Mozzie)
It's not the chassis that's the problem! It's the engine mount that it dosn't clear.And the z20 is not a jzz30 so the engine mount is also different.I'm not douting you but I know this from experiance,I fitted it myself.There is nothing wrong with the product,It's obvious that this person has not done his homework on his own product and wrongly selling it to fit all 1jz engine's when infact it dosn't.Correct me if I'm rong but please advise this person to either rectify this problem or enlist the car that it was designed for.If he would like more info on why it dosn't fit the JZZ30 engine bay then he can feel free to email me on mozziebite@gmail.com
Saturday, April 14, 2007 - 09:00 pm, by: Jeff Smith(Mozzie)
Here is some more info,pic one is the turbo mount Mod.
Pic two is a little complicated but follow Yellow 1st,red then blue.In that order.The elbow had to be moved 20mill closer to the other pipe on the dump.