Thursday, August 15, 2013 - 11:44 pm, by: Hays Sleiman(Hays1530)
Hey guys, today while I was looking for the plug to slice a reverse mirror into on the left side of the inside of my boot. I came across two cables (photos). The first one was a long one on the left side, looks like a media one of some sort...EMV?
The second one was cable tied to the fuel sender cables but had nothing plugged into it. It's a 3 pin plug and all wires were blue i think.
Can anyone tell me what they are...? Would be much appreciated
And can someone please confirm the later models don't actually have the cable I'm looking for...I read it somewhere but wasn't sure.
Saturday, August 17, 2013 - 08:07 pm, by: Hays Sleiman(Hays1530)
Not sure. The first lead has something to do with the emv as I've seen it go under the cup holder toward the emv. I don't think it's for the stacker as it's on the wrong side of the boot :S
Ian, I don't think anythings been changed in the boot ( besides the added turbo ) but I read the later models don't have the reverse camera cable in the boot.
Sunday, August 18, 2013 - 05:26 pm, by: Dave Rose(Sand_groper)
Hays, do you mean rev cam ??not reverse mirror ? if you are looking for the hookup for cam 97s don't have them ,the first pic looks like after market nav system .
Sunday, August 18, 2013 - 06:19 pm, by: Hays Sleiman(Hays1530)
Haha yes I meant camera. Must've been in the wrong frame of mind Dave...got it right in my last post though
Anyway, I've managed to hook up my own reverse camera through a relay so that it cuts the av input and shows the camer whenever the car is in reverse. Quite proud of myself for that only thing is it means I need to have the emv on AV which is usually the case anyway...
I was hoping the second plug might be input for the old float type sender as that's only a 3 pin plug and not 4 pin like the tube type...