| Author |
Message |
Costa Tsimiklis
Goo Roo
Victoria
386.2 rwkw the old T51S setup - New Setup HKS T51R SPL -Going for 450rwkw on Pump Gas!
Posts: 1443
Reg: 07-2008
|
Not sure, but based on 20 cars, 15mins per car, around 5 hrs or so.
I've prospected the next dyno day venue in the south east at a reputable location. I may make this a Toyota Dyno Day or Jap imports dyno day depending on the numbers. |
Rik Garth
TryHard
Victoria / Queensland
TT
Posts: 209
Reg: 05-2006
|
SE suburbs? Even better  |
Jack Driver
Tinkerer
vic
V8
Posts: 53
Reg: 08-2010
|
Hey Costa
Getting excited.
Might bring my son. He's 9.
Is that ok?
Will come complete with ear muffs.
Is there a stove or hotplate there.
Might bring the coffee machine as well.
Nothing like a large dose of caffeeene to go with the sound of screaming engines. |
Costa Tsimiklis
Goo Roo
Victoria
386.2 rwkw the old T51S setup - New Setup HKS T51R SPL -Going for 450rwkw on Pump Gas!
Posts: 1445
Reg: 07-2008
|
Hi Jack,
Yup your son can come, but please brief him on the safety aspects of the workshop. There is also quite a large workshop dog that roams around. The German Shepherd can look intimidating, but is quite friendly and street smart around cars and people.
I also recommend that if anyone has sensitive hearing, to bring their own hear muffs or plug their ears when some of the high powered cars come on the dyno as they are pretty loud lol. |
Christian Somerville
Goo Roo
South Australia
UZZ31 V8 LTD
Posts: 1167
Reg: 03-2009
|
Sounds awesome guys, hope you have a great day and make sure to get some vids! |
Simon Trainos
TryHard
Vic
JZZ31 VVT-i
Posts: 104
Reg: 09-2008
|
Sorry wont be able to make it tomorrow, hope you guys have a awesome day. |
Rik Garth
TryHard
Victoria / Queensland
TT
Posts: 212
Reg: 05-2006
|
Tomorrow? Damn, I'm out.
I cant make it tomorrow and I don't know where that place is. |
James Buchan
Goo Roo
Vic
V8
Posts: 1086
Reg: 10-2008
|
Was a fantastic day, well organised- thanks to Costa and Sam for the day. Great catching up with people and seeing some different power figures
my v8 made 165rwkw with just the extractors, exhaust and bfi. No complaints there |
Costa Tsimiklis
Goo Roo
Victoria
386.2 rwkw the old T51S setup - New Setup HKS T51R SPL -Going for 450rwkw on Pump Gas!
Posts: 1447
Reg: 07-2008
|
Hey Guys,
Good turnout today. Thanks to those that made it. Total of 11 cars on the dyno. I had a great time catching up with you all! Sorry I couldn't chat for longer - had to assist with the dyno operations to keep up the flow of cars before the weather broke (as it seems!).
Special thanks to Warren for giving me a hand by driving one of my Supras/Soarer's to the event. Looking forward to finishing your car off and getting 250+rwkw out of a stock twin setup in true twin turbo mode.
Hope you guys enjoyed the Free BBQ at the end for those that stuck around!
Here's some of the power figures that I remember off the top of my head:
1. Nick - 205rwkw on Twin GT28 Highflows in CT12a Housings, stock auto, computer, etc - Great result.
2. JZX100 Chaser - 165rwkw, VVTI 1JZ Boosted to 16psi
3. JZX110 Chaser - 145 rwkw? VVTI 1JZ stock
4. JZZ30 Soarer - 119rwkw VVTI 1JZ stock but possible blocked cat/collapsed muffler
5. UZZ30 Soarer V8 w/ Extractors and full system, BFI etc - 165rwkw
6. UZZ30 Soarer V8 Stock Standard 96 model - 145rwkw
7. Celsior - 137rwkw stock standard
8. Sami JZZ30 Trust T67 kit? Small Single Turbo - 268rwkw with some spectacular smoke and flame displays hehe
9. My Soarer, T51R SPL 20psi Manual - 367 rwkw with some issues that will get fixed soon
10. My Supra, T04Z 10psi Automatic - 245rwkw should make 380rwkw on 22psi
That's all I can remember for now lol. |
Allan Langford
TryHard
Vic
UZZ31
Posts: 374
Reg: 05-2010
|
sorry... I was busy....
|
Costa Tsimiklis
Goo Roo
Victoria
386.2 rwkw the old T51S setup - New Setup HKS T51R SPL -Going for 450rwkw on Pump Gas!
Posts: 1448
Reg: 07-2008
|
hmm my guess: Towing a 1UZ on a trailer? lol |
Allan Langford
TryHard
Vic
UZZ31
Posts: 376
Reg: 05-2010
|
Congratulations!!! you win an oily home made 1uz-> nissan patrol sump pan thats not needed!
includes bonus sharp edges! |
Nick Okeeffe
Tinkerer
Victoria
JZZ30 Soarer TT
Posts: 28
Reg: 04-2010
|
I had a great time and was so happy with my result. Was good to finally meet some of you and see your cars in the flesh. I would have stayed for the BBQ but wanted to get home before the weather changed.
Now I gotta save some money so i can improve on that number for the next one. |
Sami Ansari
TryHard
Victoria
GT-TL Manual
Posts: 311
Reg: 03-2007
|
I told Nick he would hit 200, but he didn't believe me.
Also, I somehow actually managed 279rwkw with all the drama.
And Costa, I wan't to do what we have been discussing, so please let me know how soon you can make it happen. |
Darren Bauer
TryHard
Victoria
Soarer TT
Posts: 156
Reg: 04-2010
|
Nick your results sound interesting. Can you elaborate a bit on your setup? |
Nick Okeeffe
Tinkerer
Victoria
JZZ30 Soarer TT
Posts: 29
Reg: 04-2010
|
Ive got a bfi, exhaust, front mount and the twin gt28's in the ct12a housings running 12psi. Really needs a tune though as it was running really rich. Unfortunately I need to build the transmission before I go for more power. |
Scott Vim
TryHard
Vic
Soarer (1uz) Chaser (1jz)
Posts: 103
Reg: 12-2010
|
What was the biggest 1uz figure? and when is the next one on? Please make it this side of town next time. |
Rik Garth
TryHard
Victoria / Queensland
TT
Posts: 213
Reg: 05-2006
|
Yea, I've done a few tweaks to mine since I last had it on the dyno and then it was 159rwkw so I'd like to know what it is now.
Another on the SE Suburbs would be great as I'd make that one.
Problem I'm having atm is when it changes gears I blow flames out the exhaust. When thats fixed it should be better maybe? |
James Buchan
Goo Roo
Vic
V8
Posts: 1087
Reg: 10-2008
|
Scott my v8 pumped out 165rwkw  |
Scott Vim
TryHard
Vic
Soarer (1uz) Chaser (1jz)
Posts: 104
Reg: 12-2010
|
165rwkw for a 4.0L N/A is decent. Extractors and BFI I'm guessing? I got 180rwkw on another dyno running 4.5psi without extractors or bfi. |
Allan Langford
TryHard
Vic
UZZ31
Posts: 377
Reg: 05-2010
|
James Buchan wrote on Monday, March 14, 2011 - 01:21 am:Scott my v8 pumped out 165rwkw
beat me by 7kw you bastard i'll have to do something about that! |
Costa Tsimiklis
Goo Roo
Victoria
386.2 rwkw the old T51S setup - New Setup HKS T51R SPL -Going for 450rwkw on Pump Gas!
Posts: 1449
Reg: 07-2008
|
Sami, for your setup, upgraded T67 fitted to your factory manifold, 3.5" dump pipe or 4" if we can fit it, highflow cat, retune and you should be making 330rwkw easy. Your ignition timing needs a lot of work. You could get over 300rwkw with the current setup with an exhaust dump made, leaks fixed and retuning the ignition timing. Mixtures are spot on at 12:1 but the ignition timing is not enough to a lot of fuel is getting pumped out and not burnt mid-top end.
Taiwanese T67 results: T67-25G with a T3 10cm housing:
http://www.skylinesaustralia.com/forums/topic/347726-kando-dynamics-turbo/page__st__120__p__5647617_ _hl__t67__fromsearch__1#entry5647617
The one that is bolto on to your setup:
http://cgi.ebay.com.au/Turbocharger-Kinugawa-T67-25G-Trust-3-Bolt-8cm-Housing-/270715237738?pt=AU_Ca r_Parts_Accessories&hash=item3f07e2b56a |
Ben Lipman
Goo Roo
SA
Soarer TT manual, plus TT track car
Posts: 2696
Reg: 04-2006
|
Rik Garth wrote on Sunday, March 13, 2011 - 11:43 pm:Problem I'm having atm is when it changes gears I blow flames out the exhaust
How is that a problem? Cool. (I'd say at a guess it is running a little rich, and you have a very 'straight through' exhaust system?) |
Jack Driver
Tinkerer
vic
V8
Posts: 54
Reg: 08-2010
|
Hey Guys and Gal
What an interesting and entertaining session that was.
Thanks to Sam and Costa for setting it all up.
Pity I could not stay for the BBQ
It was marvellous to find out that my totally stock 96 V8 was making all it should.
Was thinking of selling the car as it's not that practical at the moment but a dyno session was a new one for me and has sparked a bit more interest.
Have to correct you tho Costa, sheet says 142.8 rwkw.
I'm taking your advice Sam and renewing the air filter and I'll do a BFI as well.
Thanks again Fellas. |
Costa Tsimiklis
Goo Roo
Victoria
386.2 rwkw the old T51S setup - New Setup HKS T51R SPL -Going for 450rwkw on Pump Gas!
Posts: 1450
Reg: 07-2008
|
No worries,
There's a few tutorials on the BFI mods on these forums and planet soarer. Easy 5rwkw to be gained.
Simply cut a huge hole in he front of the airbox and run a new toyota paper filter (do not run an oiled filter as it will ruin the AFM on the V8), some partitioning / cold air induction and it will sound and breath a lot better to give you that extra power.
My dyno figures were strictly from memory so the last figure may be off lol.
I've got a few more events that I'm thinking about which are as follows in no particular order.
- Guided Factory Tour of the Toyota Altona Plant, maximum 20 people and it is a half day event on a Tuesday/Thursday during the workday. Basically its like Megafactories on Steroids - live right in front of you!
- Cruise to some location for a BBQ/Picnic/Lunch - I may make a huge cruise for charity to help with the Japanese natural disaster. It would be uber cool to get a bunch of Jap imports on the street cruising in formation
- Skid Pan / Driver Day at Sandown
- Paint Ball Session at an outdoor/indoor facility in Melbourne
- Shotgun Clay Target Shooting Competition at Frankston - I did this for my bucks and it was a great success
- Another Dyno Day
- Spanner Day at the workshop
That's all I can think of atm. If you have any ideas, post them up! |
Scott Vim
TryHard
Vic
Soarer (1uz) Chaser (1jz)
Posts: 106
Reg: 12-2010
|
What's a spanner day? |
Nick Okeeffe
Tinkerer
Victoria
JZZ30 Soarer TT
Posts: 30
Reg: 04-2010
|
I would definitely be up for a skidpan or track day. |
Adam Belfiore
Tinkerer
Victoria
soarer GT-T
Posts: 7
Reg: 09-2010
|
For my work Christmas party we went to ace gocarting in sunshine. It was great fun and you can have a group of 24 people. Just another idea for an event day . Thanks to costa and sam for the dyno day yesterday. Had a great time. |
Warren Moore
Goo Roo
Victoria
i drive a car.
Posts: 1136
Reg: 01-2010
|
Scott Vim wrote on Monday, March 14, 2011 - 04:04 pm:What's a spanner day?
|
Scott Vim
TryHard
Vic
Soarer (1uz) Chaser (1jz)
Posts: 107
Reg: 12-2010
|
Ok yeah I'm definitely up for the spanner day. |
Costa Tsimiklis
Goo Roo
Victoria
386.2 rwkw the old T51S setup - New Setup HKS T51R SPL -Going for 450rwkw on Pump Gas!
Posts: 1457
Reg: 07-2008
|
Hhaa warren, •••• that made my day |
Allan Langford
TryHard
Vic
UZZ31
Posts: 382
Reg: 05-2010
|
ahhh •••• thats why all my tools smell like fish |
James Buchan
Goo Roo
Vic
V8
Posts: 1088
Reg: 10-2008
|
Warren, where do you find that stuff man! Haha you crack me up! |
Costa Tsimiklis
Goo Roo
Victoria
386.2 rwkw the old T51S setup - New Setup HKS T51R SPL -Going for 450rwkw on Pump Gas!
Posts: 1469
Reg: 07-2008
|
Ok I've received an email back from Toyota - they are re-tooling their plant for a new production platform, so they will not be doing any public tours in 2011 - hopefully next year will be available. |
Allan Langford
TryHard
Vic
UZZ31
Posts: 388
Reg: 05-2010
|
Yep the shifter went all the way in at toyota now they have to re-tool ;) |
Previous
