Author |
Message |
Michael Fuhrmann
TryHard nowra Soarer TT
Posts: 167 Reg: 12-2011
| Im sure theres a few members like me that have a few different cars in the build or even some that have been finished any how this is my non Soarer build Its a 1981 Mitsubishi Sigma SE, it was bought as a parts car but was to good to wreck first set of mods were an SC14 supercharger on the std engine and a respray, then it kind of got out of hand from there Everything is done by me in my shed including the shortened diff It was in a zoom mag a few months back all stock painted and sc14 engine, trans, diff and brake conversion plus engineers report pic was taken a week before rego engine was a stock 302 clevo with an fmx auto and an EF XR6 falcon diff Its now a 351 with custom EFI, coil near plug and an lt16 microtech, engine is currently undergoing a rebuild + more mods |
Allan Langford
DieHard Vic UZZ31
Posts: 675 Reg: 05-2010
| Currently in progress... previously had a 7M-GTE...
one day i'll beef up the anti-roll bars! ;) |
Aaron Mead
Goo Roo NT Kluger
Posts: 3222 Reg: 03-2006
| Im past the half way mark financing my SL-C project. Since the Australian dustributor got the arse, Ive had to find another party willing to bring one in. He's a kiwi, but he can steer. Hes also a mechanic, so Im set!! Basically we're ordering 2 kits, 2 Ricardo six speeds, and 2 LS9 engines straight out of Wixom in crates, via Lingenfelter, and onto Superlite cars in Michigan. Containered, and on to Darwin. www.superlitecars.com If the Aussie distributor was still around, Id be able to buy it in stages, the rolling chassis being about $40k Id like to be finished and road registered (a lot easier in Darwin) for under $120k The pros are logging 200-230 build hours. Ill be happy with 700-800 ;) |
Ross Pesina
DieHard Vic Soarer V8, Soarer T, Soarer TT, Supra TT.
Posts: 625 Reg: 08-2006
| My current project list is a bit too long. Few issues to iron out with my hayabusa before I do a little cam upgrade to have something I can call finished (right after I re-paint it). Doing a 4G63T twin cam transplant into a mate's starion, also have a starion of my own to build. There's also a RZ supra awaiting a rebuild and a sick soarer sitting in the corner awaiting attention. Also I need to sort out some gremlin's with my wife's bike and tidy up the turbo setup in her soarer. I also need a less demanding job so I can get some of this stuff finished! |
Ali Saeed
Goo Roo WA -
Posts: 3845 Reg: 09-2007
| my current project is saving $$$ for this: http://stwot.motortrend.com/files/2012/01/Toyota-GT-86-TRD-rear-three-quarter-1024x640.jpg |
Mike Beck
Goo Roo New Zealand BMW E36 Coupe 1UZFE V8 340i
Posts: 5475 Reg: 11-2005
| For some reason I got bored with my soarers, got a BMW and put a 1UZFE into it. 90% finished at the moment, few bumpers to paint, little details to address, but runs very well with plenty of potential. Hmmm |
James Buchan
Goo Roo Vic V8
Posts: 1326 Reg: 10-2008
| new wheels mike? looks like it's coming along nicely |
Mike Beck
Goo Roo New Zealand BMW E36 Coupe 1UZFE V8 340i
Posts: 5476 Reg: 11-2005
| Yeah, got them off a mates E46 for a cheap price Getting kinda bored with it though, maybe I'm just hard to please. But Ill still end up spending more money on it, it's just that it leaves little funds for my other projects at the moment. Still need to make a new gearbox cross member after I've fitted the 3rd set of engine brackets, just to perfect the engine position, hehe. Cars.... dumb machines! |
David Grima
Goo Roo WA 1JZ-GTE TT
Posts: 1372 Reg: 07-2007
| the 1uzfe fits in there very nicely though Mike |
Tai Johnsen
Goo Roo QLD JZZ30 Pov Manual LSD & black!
Posts: 1160 Reg: 04-2006
| That looks factory! Great work Mike! Ali, My wife wants the new 86 so bad.. But no turbo!! WTF? The TRD version "might" be supercharged, but the STI subaru version will be so much better (if it comes to aus) This is my new project..
So far I have done the exhaust, sliders, bobins and got TuneECU and cable to play around. EVO2 kit is on the way which does an intake mod, battery relocate and cam.. All of which is pushing back my soarer mods But it's just so much damn fun to ride! http://www.youtube.com/watch?v=S9Ry_9TeKYg |
Mike Beck
Goo Roo New Zealand BMW E36 Coupe 1UZFE V8 340i
Posts: 5477 Reg: 11-2005
|
David Grima wrote on Wednesday, April 11, 2012 - 04:36 pm:the 1uzfe fits in there very nicely though Mike
Yeah it's actually a rather good fit, not that tight really either, the narrow 1UZ 'FE' heads certainly help, unlike the BMW V8s, heck.. now they would be a tight fit!
Tai Johnsen wrote on Wednesday, April 11, 2012 - 05:26 pm:That looks factory! Great work Mike!
Cheers Tai, it's certainly the look I was going for, all black & steel fittings, just to keep it as original looking as possible. |
Aaron Mead
Goo Roo NT Kluger
Posts: 3223 Reg: 03-2006
| Some pics of the Superlite Coupe from US builders: This is a first generation rear end. Though the cars havenbt changed per se, there have been constant additions and revisions, mostly functional. This is the current revision 'street clip' This guy didnt think the factory 315 tyres were gonna hold him down, so he widebodied the entire rear clip to suit those 15" wide rims with god knows what rubber.... The green one is full race version car. Fitted with a STOCK LS3 engine, it debuted in the Super Unlimited class in National Auto Sport Association. The result was pole position qualifying, championship winner, lap record and lead the entire race. So theres your pedigree. Thats important to some people |
Mike Beck
Goo Roo New Zealand BMW E36 Coupe 1UZFE V8 340i
Posts: 5478 Reg: 11-2005
| Impressive. Would be interesting to see one of those feature on Top Gear, by comparison to many of the other high end 'shed' cars they test out... |
Aaron Casey
Goo Roo nsw '94 jzz30 gttl, 2 mini's one supercharged
Posts: 3309 Reg: 08-2005
| Mini clubman, deseamed sides, custom moulded flares, 1310 mk1 cooper s full forged motor, 749 cam, sc12 supercharger kit. 9psi pulley Adapting 45dcoe to supercharger intake. Alloy radiator Minisport straight cut dog box 4.9 lsd Hardie driveshafts 4 spot front calipers Full adjustable lower arms and hi-lo's 4 point roll cage Heaps of other stuff.. Not all together lol if anyone has a mk1 cooper s clutch housing and assy let me know! |
Mike Beck
Goo Roo New Zealand BMW E36 Coupe 1UZFE V8 340i
Posts: 5479 Reg: 11-2005
| Supercharged Mini? |
Dan McColl
Goo Roo Victoria (The Nazi State) Pretty Red Thing and The Black Rattler
Posts: 3397 Reg: 07-2005
| Torque steer here we come. |
Aaron Mead
Goo Roo NT Kluger
Posts: 3226 Reg: 03-2006
| Got downforce?
The new race rear end, with an early diffuser. |
Mike Beck
Goo Roo New Zealand BMW E36 Coupe 1UZFE V8 340i
Posts: 5559 Reg: 11-2005
| Finally, after over 2 years of wanting to get to this stage on my non soarer project it's nearly complete. I checked it out today at the panel shop. Taking shape nicely!! A true dual RS4 exhaust on the E36 1UZ coupe...
Custom ribbed floor yet to go in.
Should sound like my old V8 soarer did with the RS4 mufflers. Most excited to get behind the wheel with that sound! |
Gary Redman
TryHard NSW Accord Euro Luxury
Posts: 478 Reg: 09-2005
| Mine's a 1958 Ford Customline (Star model) It's taking ages but getting there. Body off chassis rebuild with new floor pans and sills. I rebuilt the 272 Y Block engine and 2/3 speed transmission. Most people think these were 2 speed autos, but they were really 3 speed but always started off in 2nd gear so getting them to use 1st gear involved a lot of footwork. I have started the new engine but not driven it or tested the transmission yet as still no wheel under her. I am retaining the drum brakes but have sourced a dual system booster, and electric wiper motor. The transmission was a bit of a fiddle to rebuild with buggar all parts available. The original clutch packs used domed bronze friction plates which were worn away. I have rebuilt the packs with flat fibre friction plates and oversize steel plates to reset the original clearances and will be running a different transmission oil to compensate. I am at the stage of rewiring it now but it is getting too cold in the garage to go near it, so I estimate another year before she's on the road |
Paul Drane
Goo Roo QLD V8 Limited
Posts: 1164 Reg: 07-2005
| Put some pics up Gary, sounds like a good project. |
Matt Sartori
Goo Roo Western Australia Toyota Supra
Posts: 1076 Reg: 08-2008
| Engine: -7MGTE -W58 -Catback exhaust -Pod filter -Turbosmart manual boost controller -HKS (copy?) Blow off valve -Oil catch Can Suspension: -Lovells Springs(Unknown shocks) -Factory LSD Interior: -Boost gauge -Turbo Timer -Unkown headunit -Alpine amp under the seat. -Digital Dash |
Gary Redman
TryHard NSW Accord Euro Luxury
Posts: 479 Reg: 09-2005
|
|