Author |
Message |
Aslan Kuyucu
Tinkerer vic toyota soarer tt
Posts: 53 Reg: 03-2007
| just installed shift kit in my tt soarer. much much better then before just wont to no with you shift kitted tt owner out there is it normal when on part throttle it wont shift as hard as when on slite throttle . iv found that mine like that THANKS..... |
Blake Gloyn
TryHard manawatu soarer JZZ30 TT
Posts: 138 Reg: 02-2006
| "part throttle", and "slight throttle" sound like the same thing. what shift kit do you have? my stage 2 shifts hard all the time. my stage 1.5 is much softer at lower revs, and hard shifting at high revs. MV automatics designed it this way, to improve on the stage 2. Stage 2 is not good for diffs(Violent) and is no longer produced. |
Aslan Kuyucu
Tinkerer vic toyota soarer tt
Posts: 54 Reg: 03-2007
| stage 1 mv shift kit sorry i mean haft throttle |
Mike Beck
Goo Roo New Zealand Celsior UCF11 V8
Posts: 1479 Reg: 11-2005
| A little more care in writing your messages would be good Aslan. Capitals, correct spelling etc always goes a long way. |
Aslan Kuyucu
Tinkerer vic toyota soarer tt
Posts: 56 Reg: 03-2007
| Sorry Mike |
Mike Beck
Goo Roo New Zealand Celsior UCF11 V8
Posts: 1480 Reg: 11-2005
| Thats okay, Just here on Soarer Central you will find that you may get more of a response if your messages are more structured and easy to understand. |
Daniel Clarke
Goo Roo NSW TT 2.5L 6 cylinder
Posts: 2293 Reg: 03-2006
| I have the stage 1 shift kit and it will rip the rear tyres to shreds at half throttle on a short shift into 2nd. Its also firm on light throttle applications.. But i do have the line pressure wound up as much as i can. Which definately improved my 1/4 mile times. And i like it nice and firm on the street too |
Aslan Kuyucu
Tinkerer vic toyota soarer tt
Posts: 57 Reg: 03-2007
| thanks Daniel |
Luke Nieuwhof
Goo Roo WA Soarer TT
Posts: 2356 Reg: 07-2005
| Gotta love the chirpies and mini slide into second hehe. |
Daniel Clarke
Goo Roo NSW TT 2.5L 6 cylinder
Posts: 2377 Reg: 03-2006
| Luke, wheelspin into 2nd on the street if i shift around 7.5k,lol. |
Alex Ross
Tinkerer NSW 2.5i TT
Posts: 67 Reg: 02-2007
| Hey guys... ive been searching everywhere and i cant find where to buy a shift kit and a stall converter..... help would be awsome...thanks |
Daniel Clarke
Goo Roo NSW TT 2.5L 6 cylinder
Posts: 2708 Reg: 03-2006
| Contact Mike at MV Automatics in South Australia... Niall Bond at Bond Auto Tech can do the installation He is located in Botany. |
Alex Ross
Tinkerer NSW 2.5i TT
Posts: 69 Reg: 02-2007
| Thanks daniel... any idea of wallet damage?? |
Daniel Clarke
Goo Roo NSW TT 2.5L 6 cylinder
Posts: 2715 Reg: 03-2006
| Shift kit + fitting is around the $700 mark... I think a Stally is around the $1000 fitted. SO all up your looking at $1600-$1800 i guess. How long are you going to keep the car? You may as well get the whole gearbox rebuilt which costs $2600 including a convertor. I know its more, but this will handle alot of rwhp! |
Shyam Purushothman
TryHard Dorkland 2jzgte toyota Soarer
Posts: 277 Reg: 08-2005
| Ive been quoted this for a full rebuild, any thoughts? Is the price about right? Can anything else be done? Transmission Replace all frictions with Alto Red Eagle performance plates and upgrade capacity Fit Koleene steels Replace all bushes Mill case flat Fit deep pan off Toyota truck for more oil capacity New filter Replace all gaskets and seals and overhaul kit Modify valve body Fit larger ratio boost valve Flush and test solenoids Answermatic pressure test trans Fit custom sealing rings Fit new sprags to low reverse clutch Overhaul convertor And stall to 2500 rpm Removal and refit is extra Dyno testing is extra charge Recommend large oil cooler fitted between $180 to $220 fitted NZ3260 inc GST Convertor will be stalled to 1st stage , as much as we can go with the exsisting convertor body |
Ben Socratous
Goo Roo SA I am the fibreglass/kevlar/carbonfibre king!
Posts: 1616 Reg: 07-2005
|
Daniel Clarke wrote on Saturday, December 08, 2007 - 07:19 am:Shift kit + fitting is around the $700 mark... I think a Stally is around the $1000 fitted. SO all up your looking at $1600-$1800 i guess. How long are you going to keep the car? You may as well get the whole gearbox rebuilt which costs $2600 including a convertor. I know its more, but this will handle alot of rwhp!
Who's doing the labour in that quote? I went up and saw Mike the other day and fired off a few q's about what to do when the new motor and turbo are in. He quoted (for me dropping off just the gearbox) $810 for a 2800 stally, 1.5 shift kit and new seals/oil! |
Anish Varsani
DieHard QLD V8 UZZ30
Posts: 574 Reg: 07-2005
| Fitting shouldn't cost that much. It's only a 1 hour job plus fluid. |
Daniel Clarke
Goo Roo NSW TT 2.5L 6 cylinder
Posts: 2718 Reg: 03-2006
| Morgan was charged about 800 for just the convertor, i was going off that. If i can get my stally upped to 2800 for under $600 fitted, i would jump straight at it in the new year! |
Alex Ross
Tinkerer NSW 2.5i TT
Posts: 71 Reg: 02-2007
| HAHA in that case ill call mike and order a stage 1 kit tomorrow.... thanks for the info boys!! much appriciated! |
Anish Varsani
DieHard QLD V8 UZZ30
Posts: 575 Reg: 07-2005
| 1 hour for the shift kit. I'm not sure about the converter. |
Shyam Purushothman
TryHard Dorkland 2jzgte toyota Soarer
Posts: 279 Reg: 08-2005
| I take it since there are no references to my quote, that is about all you can do to rebuild and strenghten the gearbox. |
Braden Murdoch
DieHard NSW Cressida 1JZ TT
Posts: 773 Reg: 04-2006
| Shift kit is $385 from MV last time I checked. Fit it yourself at home, all you need is a 10mm socket, (plus rubber mallet, and a piece of wood to prise the tubes off). Can't remember how much the stallie was, my complete built auto was $2600, and paid a mate $200 to fit it. |
Lew Radbourn
Trader Queensland / Gold coast jzs147 93 TT / uzz30 93'/ 2 X uzz31 92' s
Posts: 2236 Reg: 07-2005
| BUT if you fit it your self DON'T forget to send your old valve body back to MV's |
Benjamin Burgess
Goo Roo NSW Toyota Soarer GT-TL, Toyota Corolla Conquest
Posts: 1637 Reg: 07-2005
| I got my stallie done for 380 for the converter itself exchange and was about 80 bucks or so to fit it. |