Thursday, November 08, 2007 - 03:55 pm, by: Kien Lam(Waldrider)
Hi guys.I have a problem with a flashing light thats got to do with the height controller in my Celsior.The 'NORMAL'light keeps flashing and I cannot turn it off even if I switch it to 'HIGH' setting.And I noticed that the car's height didn't respond to the changes either.Any help would be appreciated.Cheers.
Thursday, November 08, 2007 - 10:24 pm, by: Simon Martin(Commander)
The only time that happened to me with the boot switch on is when i went over a series of bumps and the suspension kind of bottomed out and the suspension went a bit haywire, turned car on and off and switch on and off and it has been right ever since.
but apart form that. There is a switch in your boot when you open it, to your left there is a panel with a pull button on it so the panel drops down. There is an on/off switch there. Make sure it is on. If it is off then that would be why your light is flashing. This light must be turned off when jacking the car up in any way as it controls the sensors and will throw them out if you lift the car without using the bags.
Friday, November 09, 2007 - 03:24 pm, by: Kien Lam(Waldrider)
Thanks guys.Everything's back to normal by itself after I rested the car for awhile.I didn't touch the switch in the boot or anything else.Maybe it bottomed out like Simon says.Cheers.
Wednesday, November 14, 2007 - 08:41 am, by: Simon Martin(Commander)
DUDE. It did it to me again yesterday!!!! It was over 2 really big dips where the car kinda went down then up (as suspension does) but on the bounce there was another dip again so it came down hard, aftermarket controller died and light flashed on dash. Got to my destination, turned car off, did work, turned car back on, all fine again. So i dunno. Unless it's some sort of combination to disable it or the sensor gets hammered or something i dunno. Wierd tho