Monday, June 02, 2014 - 02:46 pm, by: Mike Holland(Nzmike)
How are we all, i'm Mike form New Zealand and have not long brought a UZZ30 in ok condition . I am absolutely addicted to these cars now ,but having failed a few things for a W.O.F it has been a hell of a time getting everything sorted out but managed to pass .
Going for this W.O.F has recognised a couple of problems that I got away with .Finding parts here in nz hasn't been easy with only some parts available .Things i need to replace the dash cluster ,the LCD screen for air con and bits for the rear brake light module . I've searched hard on here on how to bypass the module with no luck thus far. To be fair i would've been fairly stuffed if I had not found this site so thanks to everyone for all the information
Mike Beck Goo Roo New Zealand BMW E36 Coupe 1UZFE V8 340i
Sunday, June 15, 2014 - 05:51 am, by: Mike Holland(Nzmike)
thanks Evan the rear lamp module is gray .I've recently had the warning lamp for the alternator not charging battery so have cleaned and checked all connections and replaced the brushes but still have the warning lamp on very frustrating . is there something else i need to do
Sunday, June 15, 2014 - 03:54 pm, by: Mike Holland(Nzmike)
Cheers Evan I have no tow bar fitted . I have read somewhere that it can be the resistors or something in the module but have very little knowledge of electronic components .I will get a sparky to test that for me as all lights are working fine as they are all new bulbs . The power steering pump isn't leaking onto the alternator but another hose is but fluid is not reaching the alternator . I had a mate put a voltage meter on when car was going and it only read around 12 so I figure the alternator is buggered .
Wednesday, June 25, 2014 - 11:39 am, by: Mike Holland(Nzmike)
cheers guys so far i have replaced the brushes and the regulator and still it will not charge the battery . i suspect some faulty wiring because its old and brittle as . i am thinking of renewing all the old wiring but not sure how to go about it just yet. another thing is the 7.5amp fuse for the panel just keeps blowing and i can not figure this out any ideas would be much appreciated as my patients is wearing thin .