Friday, February 06, 2009 - 07:34 pm, by: David Grab(Blastedbyasoarer)
Hey all i wanna block off my stock BOV and leave it there. From my understanding, quick and lazy at that i need to block off these two places? Can anyone tell me if im correct and if not can someone draw on this diagram what needs to be blocked off.
Friday, February 06, 2009 - 10:52 pm, by: James Harris(Haro)
keep the hose on and simply put a PLUG in it to stop any air passing through it. I did it using a GFB plug thingo that came with a mates BOV.
Im pretty confident i still have that floating around if you are keen. Jam that into the hose, use a hose clamp in the middle (the plug has ridges on both ends).
Then remove all the vacuum lines also from it and it will be fine.
Saturday, February 07, 2009 - 09:55 am, by: David Grab(Blastedbyasoarer)
Yeah sweet mate beats using a coke cap or puting effort into making a proper one out of thick plastic. PM me your bank details mate and ill transfer the cash your way.
Wednesday, February 18, 2009 - 12:32 pm, by: Luke Burt(Burt)
Instead of using a plug in the hose
pull the big hose off the BOV, and you will find a welch plug will fit in there perfectly, I can't remember the size, but mine was a perfect fit, then just put the hose back on and thats it...