Thursday, March 05, 2009 - 05:16 am, by: Nathan Hlad(Jackpot)
if i get a greddy profec boost controller installed on my stock 1jz ecu then get a greddy emanage and vmanage will the person who installs the ecu management be able to reconnect the ecu to the boost controller ??
Thursday, March 05, 2009 - 05:54 pm, by: David Tra(Bookie)
Yeh. With the boost controller, you tap into the ECU. When you install piggy back management, you tap into the ECU also. You are not replacing any wires.
Thursday, March 05, 2009 - 11:07 pm, by: Mike Dobkin(Razman)
Does the Profec actually need to connect to the ecu at all? My TDI EBC has its own boost sensor and simplt controls the boost via a vacuum pipe and solenoid.
For the Emanage try and find a Fields Harness - makes installation literally five minutes and no technical ability required. Just unplug the ecu and insert the harness between ecu and Emanage ..... easy peasy.