Friday, November 16, 2012 - 09:03 pm, by: Luke Wright(Shaved666)
hey guys my car has been stored in my brothers car port for the last 18 months or so so havnt been able to work on it, ive recently jumped back into it getting a lot done and ive decided not to go with the aftermarket plenumn cause its to much hassle. ive since polished up the original manifold and throttle body and put them back on. the promblem im having is that i pulled them off so long ago i cant remember where all the lines went and have spent hours on the net trying to find diagrams or pictures that help. ive sorted out half of it but not sure on the following 1. the 2 lines that go into the cold start at the back of the manifold, need to know where they come from. 2. the 2 vacuum lines from the vacuum switch uner neath the manifold need to know where they go. 3. does the map sensor go to the sensor that screws in to the rocker cover side of the manifold and where does the line above it go. 4. the lines on the throttle body, i know 2 are for the coolent to pass through but not sure where the others go. 5. also i dicthed the charcol canister when i took the manifold off and was wandering what to do with the lines?
any help would be great as ive had no luck and would love to be able to hear the car runing again. cheers luke
Friday, November 16, 2012 - 09:39 pm, by: Luke Wright(Shaved666)
thanks but i have already found and saved those diagrams which did help a bit but i could'nt figure out what i listed above from the diagram as some of the lines blank off the diagram. only thing i can take from that is assuming the line from the sensor on the back going to the box is that the box is the map sensor? thanks
Previous
