Saturday, December 15, 2012 - 04:55 pm, by: Joseph Kelly(Phenonix)
I'm getting a noise from the belt on acceleration, i've cleaned the belt with a wire brush to remove glazing but it is still the same.
I know it can be difficult to diagnose if its the belts or pulleys but i'm hoping if i describe the symptoms someone could help me narrow it down.
If i accelerate gradually its almost as if i can control the noise, the minute i hear a chirp if i release a tiny bit it stops, then slowly build the speed up, but if i press the accelerator hard it is then a constant sound.
Also when i release the accelerator pedal quickly the noise appears for a second or two almost at the same time as when the car slows down not immediately on release of the pedal., i hoping its this bit that would help narrow it down.
Previous
