I have a 1991 Soarer UZZ31 with Airbag light on. When following Harry Lemmens procedure, the SRS light comes straight back on after the reset procedure. The error code 41 that I am getting isn't listed when shorting Tc and E1. Any ideas?
All fixed now. The airbag ECU had leaky caps, which I had replaced but airbag light remained with error code 41 still on. I found I was moving the earth wire to slowly between the two pins, had to toggle the earth wire as fast as I could, then cleared the airbag light fine.
yes I agree, I added the fix because unfortunately there are too many fault trails with no feedback for the final fix. I bought a spare airbag ecu, but it had same leaky caps, restored it as well. Good to have a spare. I really like this site for so much help in keeping these cars running.